INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
Home » Mechanical
AVK D.I Restrained Mechanical Coupling
RM690.00 – RM10,400.00- 35 bar / 350 meters allowable operating pressure (AOP) to 1000mm OD
- Dedicated pipe OD, pipe ovality is critical for coupling tolerance of ±3.0mm
- Restrained
| Connection | Mechanical Joints |
| Material | Ductile Iron |
| DN | DN232 |
| Pressure | PN35 |
Fitting Variations Clear
- 50MM X 90°
- 65MM(76.1) X 90°
- 80MM X 90°
- 100MM X 90°
- 125MM(139.7) X 90°
- 150MM(165.1) X 90°
- +4
VISION Grooved Mechanical 90° Short Elbow (002) BS
RM17.77 – RM108.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 65MM(73.0) X 90°
- 125MM(141.3) X 90°
- 150MM(168.3) X 90°
- 200MM(219.1) X 90°
- +2
VISION Grooved Mechanical 90° Short Elbow (002) API
RM22.27 – RM217.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Short Elbow (002) JIS
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 32MM X 90°
- 40MM X 90°
- 50MM X 90°
- 65MM(76.1) X 90°
- 80MM X 90°
- 100MM X 90°
- 125MM(139.7) X 90°
- 150MM(165.1) X 90°
- +6
VISION Grooved Mechanical 90° Standard Elbow (002L) BS
RM18.75 – RM162.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) API
RM300.00 – RM831.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) JIS
RM300.00 – RM831.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) API/JIS
RM2,176.50 – RM3,375.00- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 40MM(48.3) X 45°
- 65MM(76.1) X 45°
- 80MM X 45°
- 100MM X 45°
- 125MM(139.7) X 45°
- 150MM(165.1) X 45°
- 350MM(355.6) X 45°
- 400MM(406.4) X 45°
- 450MM(457.2) X 45°
- +7
VISION Grooved Mechanical 45° Short Elbow (003) BS
RM17.77 – RM1,275.00- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Short Elbow (003) API
RM99.00 – RM463.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Short Elbow (003) JIS
RM217.50 – RM463.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Standard Elbow (003L)
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 50MM(60.3) X 22.5°
- 65MM(76.1) X 22.5°
- 80MM(88.9) X 22.5°
- 100MM(114.3) X 22.5°
- 150MM(165.1) X 22.5°
- 200MM(216.3) X 22.5°
- +4
VISION Grooved Mechanical 22.5° Standard Elbow (0031)
RM37.50 – RM202.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION Grooved Mechanical End Cap (005) BS
RM30.97 – RM78.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical End Cap (005) API
RM30.97 – RM153.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical End Cap (005) JIS
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 50MM X 25MM
- 65MM(76.1) X 25MM
- 65MM(73.0) X 25MM
- 80MM X 25MM
- 100MM X 25MM
- 125MM(139.7) X 25MM
- 150MM(165.1) X 25MM
- 150MM(168.3) X 25MM
- 200MM(216.3) X 25MM
- 200MM(219.1) X 25MM
- +8
VISION Grooved Mech. End Cap with Hole (005H)
RM27.00 – RM88.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Centre Hole: Female thread, NPT/ BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Sizes: |
|---|---|
| BS | 50mm, 65mm (76.1), 80mm, 100mm, 125mm (139.7), 150mm (165.1) |
| API | 65mm (73.0), 150mm (168.3), 200mm (219.1) |
| JIS | 200mm (216.3) |
VISION 65mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standard: | Reducer Sizes: |
|---|---|
| BS: 65mm(76.1) | 40mm, 50mm |
| API: 65mm(73.0) | 50mm |
VISION 80mm Grooved Mech. Concentric Reducer (008)
RM24.00 – RM37.12
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 40mm, 50mm, 65mm(76.1) |
| API | 65mm(73.0) |
Fitting Variations Clear
- 100MM X 65MM(73.0)
- 100MM X 32MM
- 100MM X 40MM
- 100MM X 50MM
- 100MM X 65MM(76.1)
- 100MM X 80MM
- +5
VISION 100mm Grooved Mech. Concentric Reducer (008)
RM35.85 – RM45.00
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 40mm, 50mm, 65mm(76.1), 80mm |
| API | 65mm(73.0) |
VISION 125mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 125mm(139.7) | 65mm(76.1), 80mm, 100mm |
Fitting Variations Clear
- 150MM(165.1) X 32MM
- 150MM(165.1) X 50MM
- 150MM(165.1) X 65MM
- 150MM(168.3) X 65MM(73.0)
- 150MM(165.1) X 80MM
- 150MM(168.3) X 80MM
- 150MM(165.1) X 100MM
- 150MM(168.3) X 100MM
- 150MM(165.1) X 125MM(139.7)
- +7
VISION 150mm Grooved Mech. Concentric Reducer (008)
RM72.60 – RM337.50
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 150mm(165.1) | 32mm, 50mm, 65mm, 80mm, 100mm, 125mm(139.7) |
| API: 150mm(168.3) | 65mm(73.0), 80mm, 100mm |
Fitting Variations Clear
- 200MM(216.1) X 65MM(76.1)
- 200MM(216.1) X 80MM(88.9)
- 200MM(219.1) X 80MM(88.9)
- 200MM(216.1) X 100MM(114.3)
- 200MM(216.1) X 125MM(139.7)
- 200MM(216.1) X 150MM(165.1)
- 200MM(219.1) X 150MM(168.3)
- +5
VISION 200mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 200mm(216.1) | 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| API: 200mm(219.1) | 80mm(88.9), 150mm(168.3) |
Fitting Variations Clear
- 250MM(267.4) X 80MM(88.9)
- 250MM(267.4) X 100MM(114.3)
- 250MM(267.4) X 125MM(139.7)
- 250MM(267.4) X 150MM(165.1)
- 250MM(273.0) X 200MM(219.1)
- 250MM(267.4) X 200MM(216.3)
- +4
VISION 250mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 250mm(267.4) | 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1), 200mm(216.3) |
| API: 250mm(273.0) | 200mm(219.1) |
Fitting Variations Clear
- 300MM(318.5) X 125MM(139.7)
- 300MM(318.5) X 150MM(165.1)
- 300MM(318.5) X 200MM(216.3)
- 300MM(318.5) X 250MM(267.4)
- +2
VISION 300mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3), 250mm(267.4) |
Fitting Variations Clear
- 350MM(355.6) X 150MM(165.1)
- 350MM(355.6) X 250MM(273.0)
- 350MM(355.6) X 250MM(267.4)
- 350MM(355.6) X 300MM(318.5)
- +2
VISION 350mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 150mm(165.1), 250mm(267.4) |
| API | 250mm(273.0) |
| JIS | 300mm(318.5) |
VISION 400mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| JIS: 400mm(406.4) | 300MM(318.5), 350mm(355.6) |
VISION 50mm Threaded Mech. Concentric Reducer (009)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 50mm | 20, 25mm, 32mm, 40mm |
Fitting Variations Clear
- 65MM (76.1) X 20MM
- 65MM(73.0) X 20MM
- 65MM(76.1) X 25MM
- 65MM(73.0) X 25MM
- 65MM(76.1) X 32MM
- 65MM(73.0) X 32MM
- 65MM(76.1) X 40MM
- 65MM(73.0) X 40MM
- 65MM(76.1) X 50MM
- 65MM(73.0) X 50MM
- +8
VISION 65mm Threaded Mech. Concentric Reducer (009)
RM37.50 – RM41.25
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 65mm(76.1) | 20, 25mm, 32mm, 40mm, 50mm |
| API: 65mm(73.0) | 20, 25mm, 32mm, 40mm, 50mm |
Fitting Variations Clear
- 80MM(88.9) X 32MM
- 80MM(88.9) X 25MM
- 80MM X 40MM
- 80MM X 50MM
- 80MM X 65MM(73.0)
- 80MM X 65MM(76.1)
- +5
VISION 80mm Threaded Mech. Concentric Reducer (009)
RM34.50 – RM45.00
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 25mm, 32mm, 40mm, 50mm, 65mm(76.1) |
| API | 65MM(73.0) |
Fitting Variations Clear
- 100MM(114.3) X 25MM(33.4)
- 100MM(114.3) X 32MM(42.2)
- 100MM X 40MM
- 100MM X 50MM
- 100MM(114.3) X 65MM(76.1)
- +3
VISION 100mm Threaded Mech. Concentric Reducer (009)
RM43.50 – RM52.50
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 100mm(114.3) | 25mm(33.4), 32mm(42.2), 40mm, 50mm, 65mm(76.1) |
Fitting Variations Clear
- 150MM(165.1) X 40MM(48.3)
- 150MM(165.1) X 25MM(33.4)
- 150MM(165.1) X 32MM(42.2)
- 150MM(165.1) X 50MM(60.3)
- 150MM(168.3) X 65MM(73.0)
- 150MM(165.1) X 125MM(139.7)
- +5
VISION 150mm Threaded Mech. Concentric Reducer (009)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 150mm(165.1) | 25mm(33.4), 32mm(42.2), 40mm(48.3), 50mm(60.3), 125mm(139.7) |
| API: 150mm(168.3) | 65mm(73.0) |
Fitting Variations Clear
- 65MM(76.1) X 25MM
- 65MM(76.1) X 32MM
- 65MM(76.1) X 32MM X 25MM
- 65MM(76.1) X 40MM
- 65MM(76.1) X 40MM X 25MM
- 65MM(76.1) X 40MM X 32MM
- +4
VISION 65mm Mech. Cross Tee – Threaded Outlet (304) BS
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 80MM X 20MM
- 80MM X 25MM
- 80MM X 32MM
- 80MM X 32MM X 25MM
- 80MM X 40MM
- 80MM X 40MM X 25MM
- 80MM X 40MM X 32MM
- 80MM X 50MM
- 80MM X 50MM X 25MM
- 80MM X 50MM X 32MM
- 80MM X 50MM X 40MM
- +9
VISION 80mm Mech. Cross Tee – Threaded Outlet (304) BS
RM69.75 – RM75.00
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 100MM X 25MM
- 100MM X 32MM
- 100MM X 32MM X 25MM
- 100MM X 40MM
- 100MM X 40MM X 25MM
- 100MM X 40MM X 32MM
- 100MM X 50MM
- 100MM X 50MM X 25MM
- 100MM X 50MM X 32MM
- 100MM X 50MM X 40MM
- 100MM X 65MM(76.1)
- 100MM X 80MM
- 100MM X 80MM X 65MM(76.1)
- +11
VISION 100mm Mech. Cross Tee – Threaded Outlet (304) BS
RM71.25 – RM87.00
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 150MM(165.1) X 25MM
- 150MM(165.1) X 32MM
- 150MM(165.1) X 32MM X 25MM
- 150MM(165.1) X 40MM
- 150MM(165.1) X 40MM X 25MM
- 150MM(165.1) X 40MM X 32MM
- 150MM(165.1) X 50MM
- 150MM(165.1) X 50MM X 25MM
- 150MM(165.1) X 50MM X 32MM
- 150MM(165.1) X 50MM X 40MM
- 150MM(165.1) X 65MM(76.1)
- 150MM(165.1) X 80MM
- 150MM(165.1) X 100MM
- +11
VISION 150mm Mech. Cross Tee – Threaded Outlet (304) BS
RM107.25 – RM127.50
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Cross Tee – Threaded Outlet (304) API
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Cross Tee – Threaded Outlet (304) JIS
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) BS
RM82.50 – RM364.50
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) API
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) JIS
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 50MM(60.3)
- 65MM(76.1)
- 80MM(88.9)
- 100MM(114.3)
- 125MM(139.7)
- 150MM(165.1)
- 200MM(216.3)
- +5
VISION Grooved Mech. Short Equal Tee (004)
RM32.25 – RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Tee Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION Grooved Mech. Short Equal Tee (004) API
RM32.25 – RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 32MM(42.9)
- 40MM(48.8)
- 50MM(60.3)
- 65MM(76.1)
- 80MM(88.9)
- 100MM(114.3)
- 125MM(139.7)
- 150MM(165.1)
- 450MM(457.2)
- +7
VISION Grooved Mech. Straight Equal Tee (004L) BS
RM30.00 – RM219.75
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Equal Tee (004L) API
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Equal Tee (004L) JIS
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Fitting Variations Clear
- 65MM(73.0) X 50MM
- 150MM(168.3) X 80MM
- 150MM(168.3) X 100MM
- 200MM(219.1) X 80MM(88.9)
- 200MM(219.1) X 150MM(168.3)
- +3
VISION Mech. Reducing Tee – Grooved End (011) API
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
RM57.00 – RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Filter by price
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
