-30%
ALFRAN C.S SGP 200mm~250mm Reducing Tee
Price range: RM299.40 through RM581.00
ALFRAN C.S SGP 80mm~100mm Reducing Tee
Price range: RM28.00 through RM55.30
ALFRAN C.S SGP 125mm~150mm Reducing Tee
Price range: RM59.50 through RM79.10
Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
Shipping & Delivery
Related products
ALFRAN Carbon Steel ANSI 150LBS Slip-On Flange R/F (SORF)
Price range: RM10.53 through RM1,520.10
Slip-On Flanges are a popular low-cost flange type for low-pressure applications. The flange simply slides onto the pipe where two fillet welds, one on the outside and the other on the inside, seal and fasten the connection.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.7MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
| 65MM (ID: 74.6MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.0MM) | 125MM (ID: 144.0MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
| 250MM (ID: 276.2MM) | 300MM (ID: 327.0MM) | |
| 350MM (ID: 359.2MM) | 400MM (ID: 410.4MM) | |
| 450MM (ID: 416.8MM) | 500MM (ID: 513.1MM) | |
| 600MM (ID: 615.9MM) | 600MM (ID: 717.55MM) | |
| 800MM (ID: 819.15MM) | 1000MM (ID: 1019.0MM) | |
ALFRAN Carbon Steel (SCH 40) Seamless 100mm~300mm Concentric Reducer
Price range: RM15.60 through RM191.10
Pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. A concentric reducer works the same way as eccentric, but resembles a cone and keeps fluid or gas more centered, whereas eccentric reducers have a parallel edge, which results in an offsetting center.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 40) Seamless Eccentric Reducer
Price range: RM27.95 through RM284.70
An eccentric reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Eccentric reducers are used if the same top or bottom level of the pipe is required.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless 90° Bend
Price range: RM3.56 through RM754.65
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless Equal Tee
Price range: RM11.86 through RM1,404.00
Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP 45° Bend – SCH Std.
Original price was: RM2,320.61.RM1,624.43Current price is: RM1,624.43.
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP End Cap
Price range: RM9.10 through RM280.33
End Cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw onto the male end of the pipe. It can also be welded on to close the end of the pipe.
Alfran SGP, SCH 40 Fittings
ALFRAN Seamless Carbon Steel SCH 40 Pipe
Price range: RM41.00 through RM3,699.00
Carbon steel pipe is used in applications that do not require the pipe to be galvanized. It is manufactured without a seam and requires very little maintenance. Carbon steel pipe can be cut and threaded to fit your needs.
| Pipe Type | Seamless Pipe |
| Pressure Class | SCH 40 |
| Body Material | Carbon Steel |
| Nominal Diameter | Ø9mm ~Ø600mm |
| Pipe Length | 6 Meters |
| Specification | API 5L Gr.B ASTM A106 Gr.B |