-30%
ALFRAN C.S SGP Concentric Reducer - SCH Std. 500mm~800mm
Original price was: RM2,194.00.RM1,535.80Current price is: RM1,535.80.
ALFRAN C.S SGP 400mm~450mm Concentric Reducer
Price range: RM482.42 through RM1,538.60
ALFRAN C.S SGP 500mm~600mm Concentric Reducer
Price range: RM1,395.96 through RM2,539.60
Pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. A concentric reducer works the same way as eccentric, but resembles a cone and keeps fluid or gas more centered, whereas eccentric reducers have a parallel edge, which results in an offsetting center.
Shipping & Delivery
Related products
ALFRAN Carbon Steel ANSI 150LBS Slip-On Flange R/F (SORF)
Price range: RM10.53 through RM1,520.10
Slip-On Flanges are a popular low-cost flange type for low-pressure applications. The flange simply slides onto the pipe where two fillet welds, one on the outside and the other on the inside, seal and fasten the connection.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.7MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
| 65MM (ID: 74.6MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.0MM) | 125MM (ID: 144.0MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
| 250MM (ID: 276.2MM) | 300MM (ID: 327.0MM) | |
| 350MM (ID: 359.2MM) | 400MM (ID: 410.4MM) | |
| 450MM (ID: 416.8MM) | 500MM (ID: 513.1MM) | |
| 600MM (ID: 615.9MM) | 600MM (ID: 717.55MM) | |
| 800MM (ID: 819.15MM) | 1000MM (ID: 1019.0MM) | |
ALFRAN Carbon Steel (SCH 40) Seamless 25mm~80mm Reducing Tee
Price range: RM17.35 through RM53.30
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 40) Seamless Eccentric Reducer
Price range: RM27.95 through RM284.70
An eccentric reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Eccentric reducers are used if the same top or bottom level of the pipe is required.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless 90° Bend
Price range: RM3.56 through RM754.65
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless Equal Tee
Price range: RM11.86 through RM1,404.00
Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP 45° Bend
Price range: RM2.24 through RM2,785.76
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP 45° Bend – SCH Std.
Original price was: RM2,320.61.RM1,624.43Current price is: RM1,624.43.
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP End Cap – SCH Std.
Original price was: RM1,450.01.RM1,015.01Current price is: RM1,015.01.
End Cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw onto the male end of the pipe. It can also be welded on to close the end of the pipe.
Alfran SGP, SCH 40 Fittings