-30%
ALFRAN C.S SGP End Cap
RM9.10 – RM280.33Price range: RM9.10 through RM280.33
ALFRAN C.S SGP 90° Bend
RM2.31 – RM3,979.52Price range: RM2.31 through RM3,979.52
ALFRAN C.S SGP 90° Bend – SCH Std.
RM357.00 – RM3,979.52Price range: RM357.00 through RM3,979.52
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
SKU:
F-SGPB-SD
Categories: C.S SGP FITTINGS, C.S WELDED SGP FITTINGS
Tags: 90° Bend, Carbon Steel, SCH STD, SGP
Shipping & Delivery
Related products
ALFRAN Carbon Steel ANSI 150LBS Slip-On Flange R/F (SORF)
RM10.53 – RM1,520.10Price range: RM10.53 through RM1,520.10
Slip-On Flanges are a popular low-cost flange type for low-pressure applications. The flange simply slides onto the pipe where two fillet welds, one on the outside and the other on the inside, seal and fasten the connection.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.7MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
| 65MM (ID: 74.6MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.0MM) | 125MM (ID: 144.0MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
| 250MM (ID: 276.2MM) | 300MM (ID: 327.0MM) | |
| 350MM (ID: 359.2MM) | 400MM (ID: 410.4MM) | |
| 450MM (ID: 416.8MM) | 500MM (ID: 513.1MM) | |
| 600MM (ID: 615.9MM) | 600MM (ID: 717.55MM) | |
| 800MM (ID: 819.15MM) | 1000MM (ID: 1019.0MM) | |
ALFRAN Carbon Steel (SCH 40) Seamless 45° Bend
RM2.92 – RM1,483.95Price range: RM2.92 through RM1,483.95
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 40) Seamless Eccentric Reducer
RM27.95 – RM284.70Price range: RM27.95 through RM284.70
An eccentric reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Eccentric reducers are used if the same top or bottom level of the pipe is required.
Alfran SGP, SCH 40 Fittings
SOUTHERN C.S Black Pipe (JIS G3452)
JIS G3452 Carbon Steel pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
Southern Pipe Catalogue
| Standard | JIS G3452 |
| Nominal Diameter | Ø200mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Black |
