-35%
BRC ‘DA9’ Full-Spec (6M x 2.2M) Wire Mesh (BS-MS145:2014)
Price range: RM257.40 through RM1,142.86
BRC 'A' Full-Spec (6M x 2.2M) Wire Mesh (BS-MS145:2014)
Price range: RM128.70 through RM571.43
BRC ‘B’ Full-Spec (6M x 2.2M) Wire Mesh (BS-MS145:2014)
Price range: RM216.22 through RM698.41
Standard sheet manufactured in sheet form which is 6.00 meters length by 2.20 meters width.
| Size | A, B, C and DA |
| Grade | Grade 485 & 500 |
| Specification | BS – MS145: 2014 |
Shipping & Delivery
Related products
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM163.00.RM122.25Current price is: RM122.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mechanical Tee – Grooved Outlet (301) BS
Price range: RM39.75 through RM45.75
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mechanical Tee – Grooved Outlet (301) BS
Price range: RM46.35 through RM54.00
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM38.25 through RM39.75
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM105.00 through RM111.00
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized