-25%
CONEX ART.617: Copper P/T Tee
Price range: RM21.37 through RM35.70
CONEX ART.601EQ: Copper Equal Tee
Price range: RM16.35 through RM303.75
CONEX ART.601R: Copper Reducing Tee
Price range: RM24.00 through RM43.65
The reducing tee can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
Shipping & Delivery
Related products
CONEX ART.402: Copper Valve Elbow
Price range: RM10.50 through RM216.75
The elbow fitting connects two pipe joints of the same nominal diameter to make the pipe can be turned either 45 or 90 degrees.
CONEX - Compression
CONEX ART.S68: Copper DZR Internal Reducer
Price range: RM8.47 through RM12.00
Compression fittings work by the compression of an 'olive' (Interner Reducer) between two tapered surfaces and the pipe itself. The two surfaces are the body of the fitting (be it a valve, connector or any other type) and the nut.
CONEX - Compression
CONEX Copper Welding 28mm Reducing Coupler
Original price was: RM7.80.RM5.85Current price is: RM5.85.
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer - larger end male copper for insertion into fitting x female copper
SCI STEAM 100mm Reducing Tee S/E
Original price was: RM150.00.RM97.50Current price is: RM97.50.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION 80mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM97.50 through RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized