-25%





CONEX Copper Welding 159mm Reducing Tee
RM2,077.00 Original price was: RM2,077.00.RM1,557.75Current price is: RM1,557.75.

CONEX Copper Welding 76mm Reducing Tee
RM485.00 Original price was: RM485.00.RM363.75Current price is: RM363.75.
CONEX Copper Welding 108mm Reducing Tee
RM944.00 Original price was: RM944.00.RM708.00Current price is: RM708.00.
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
Shipping & Delivery
Related products
S2S Stainless Steel Reducing Tee S/E
RM7.50 – RM64.80
HANSEN Poly Reducing Tee
RM2.89 – RM3.98
The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
Sansico - Hansen Fittings & Pipe
ALFRAN Carbon Steel (SCH 40) Seamless 25mm~80mm Reducing Tee
RM17.35 – RM53.30
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
Alfran SGP, SCH 40 Fittings
SCI STEAM 32mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION Mech. Reducing Tee – Grooved End (011) API
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
RM97.50 – RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized