-25%
ALFRAN Mild Steel (BS10) Table 'E' Flange - Forged
Price range: RM16.20 through RM133.65
CONEX Copper Welding 108mm Reducing Tee
Original price was: RM944.00.RM708.00Current price is: RM708.00.
CONEX Copper Welding 159mm Reducing Tee
Original price was: RM2,077.00.RM1,557.75Current price is: RM1,557.75.
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
Shipping & Delivery
Related products
ALFRAN 304 Stainless Steel 100mm Reducing Tee S/E
Original price was: RM320.00.RM192.00Current price is: RM192.00.
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
S2S Stainless Steel Reducing Tee S/E
Price range: RM7.50 through RM64.80
HANSEN Poly Reducing Tee
Price range: RM2.89 through RM3.98
The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
Sansico - Hansen Fittings & Pipe
SCI STEAM 25mm Reducing Tee S/E
Original price was: RM9.40.RM6.11Current price is: RM6.11.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 80mm Reducing Tee S/E
Original price was: RM110.00.RM71.50Current price is: RM71.50.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM57.00 through RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM134.00.RM100.50Current price is: RM100.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized