-25%
CONEX Copper Welding 28mm Reducing Tee
Price range: RM14.25 through RM17.85
CONEX Copper Welding 15mm Reducing Tee
Price range: RM6.08 through RM17.40
CONEX Copper Welding 22mm Reducing Tee
Price range: RM6.75 through RM9.23
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
Shipping & Delivery
Related products
ALFRAN 304 Stainless Steel 100mm Reducing Tee S/E
Original price was: RM320.00.RM192.00Current price is: RM192.00.
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
304 Stainless Steel (SCH 10) BW 300mm Reducing Tee
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
SCI STEAM 20mm Reducing Tee S/E
Original price was: RM8.40.RM5.46Current price is: RM5.46.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 65mm Reducing Tee S/E
Original price was: RM76.00.RM49.40Current price is: RM49.40.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION Mech. Reducing Tee – Grooved End (011) API
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Grooved End (011) JIS
Original price was: RM1,316.00.RM987.00Current price is: RM987.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM97.50 through RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized