-25%
CONEX Copper Welding 35mm Reducing Coupler
Original price was: RM20.40.RM15.30Current price is: RM15.30.
CONEX Copper Welding 22mm Reducing Coupler
Original price was: RM6.50.RM4.87Current price is: RM4.87.
CONEX Copper Welding 28mm Reducing Coupler
Original price was: RM7.80.RM5.85Current price is: RM5.85.
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer – larger end male copper for insertion into fitting x female copper
Shipping & Delivery
Related products
CONEX ART.301R: Copper Reducing Socket
Price range: RM11.85 through RM31.12
The reducing socket fittings can make parallel connection of two pipes with different diameters.
CONEX - Compression
CONEX ART.303: Copper P/T Socket
Price range: RM9.52 through RM88.50
The socket fittings can make parallel connection of two pipes with the same nominal diameter.
CONEX - Compression
CONEX ART.601R: Copper Reducing Tee
Price range: RM24.00 through RM43.65
The reducing tee can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
CONEX - Compression
SCI STEAM 80mm Reducing Tee S/E
Original price was: RM110.00.RM71.50Current price is: RM71.50.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION Mech. Reducing Tee – Grooved End (011) API
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM163.00.RM122.25Current price is: RM122.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM75.00 through RM84.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized