RF-100 Unbraided Flexible Hose
RM57.80 – RM85.00Price range: RM57.80 through RM85.00
GF+ PP-R (25mm~65mm) Reducing Tee
RM3.05 – RM37.07Price range: RM3.05 through RM37.07
GF+ PP-R (75mm~110mm) Reducing Tee
RM59.43 – RM159.81Price range: RM59.43 through RM159.81
Reducing Tees are a pipe fitting used to connect three pieces of pipe at an angle of 90 degrees, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
Shipping & Delivery
Related products
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Grooved End (011) JIS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Threaded Outlet (012) BS
RM75.00 – RM84.00Price range: RM75.00 through RM84.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
