Ground Granulated Blast-Furnace Slag
Ground-granulated blast-furnace slag (GGBS or GGBFS) is obtained by quenching molten iron slag (a by-product of iron and steel-making) from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. Ground-granulated blast furnace slag is highly cementitious and high in CSH (calcium silicate hydrates) which is a strength enhancing compound which improves the strength, durability and appearance of the concrete.
Shipping & Delivery
Related products
Bulk Cement (MS 522: PART 1:1989)
Cement which is transported and delivered in bulk (usually in specially constructed vehicles) instead of in bags.
Bulk Cement is suitable for general concrete applications, road stabilisation, cemented aggregate fill (CAF), cemented paste fill (CPF), controlled low strength material (CLSM) and shotcrete.
Panda Blue – Ordinary Portland Cement (50KG per bag)
RM24.50
Panda Blue (OPC) - Ideals for concreting, grouting and pre-casting
HUME - OPC (Panda Blue)
Panda Green – Portland Composite Cement (50KG per bag)
RM24.50
Panda Green (Composite Cement) - Ideals for general purpose cement, brick laying, plastering, and tiling
HUME - PCC (Panda Green)
Skim Coat Base – Grey (40KG)
- Skim Coat (Base Coat) for the plastered wall, block wall, concrete wall, and ceiling to smooth out the uneven, rough surface
- Suitable to be used for internal and external applications to achieve good flatness
- Highly recommended for the project with QLASSIC / CONQUAS / BQUAS requirement
Skim Coat Base – White (25KG)
- Skim Coat (Base Coat) for the plastered wall, block wall, concrete wall, and ceiling to smooth out the uneven, rough surface
- Suitable to be used for internal and external applications to achieve good flatness
- Highly recommended for the project with QLASSIC / CONQUAS / BQUAS requirement
Skim Coat Finish – White (25KG)
- Skim Coat (Top Coat) for the plastered wall, concrete wall, and ceiling to achieve a smooth finish surface
- Suitable to be used for internal application prior to the painting job
- Highly recommended for the project with QLASSIC / CONQUAS / BQUAS requirement
ADX Masonry Mortar Thin (111) Strong Adhesion
Masonry Mortar Thin (111) is a high-performance polymer-modified premixed mortar specially formulated for thin plastering/rendering with excellent adhesion performance and a semi-smooth finish. ADXTM Masonry Mortar Thin is a superior substitution for job-site cement-sand mortar. It can also be used for patching and surface improvement works on cement rendered surfaces.
ADX - Mortar Solution Specialist