-35%

SOUTHERN C.S Black Pipe (JIS G3452)
RM1,355.00 Original price was: RM1,355.00.RM880.75Current price is: RM880.75.

SOUTHERN 25mm~150mm M.S Black 'C' Pipe (BS EN 10255)
RM80.60 – RM581.75
MELEWAR C.S Black Pipe (JIS G3452)
RM707.85 – RM1,980.55
JIS G3452 Carbon Steel pipe is a good choice when your project requires a high-strength material and low luster isn’t a concern. Available in different wall thicknesses to suit just about any pressure requirement.
Standard | JIS G3452 |
Nominal Diameter | Ø175mm ~Ø350mm |
Thickness | 5.3mm, 5.8mm, 6.6mm, 6.9mm & 7.9mm |
Pipe Length | 6 Meters |
Surface Finishing | Black |
Shipping & Delivery
Related products
ALFRAN Carbon Steel ANSI 150LBS Slip-On Flange R/F (SORF)
RM10.53 – RM1,520.10
Slip-On Flanges are a popular low-cost flange type for low-pressure applications. The flange simply slides onto the pipe where two fillet welds, one on the outside and the other on the inside, seal and fasten the connection.
Flange Sizes & Inner Diameter | ||
---|---|---|
15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
25MM (ID: 34.5MM) | 32MM (ID: 43.7MM) | |
40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
65MM (ID: 74.6MM) | 80MM (ID: 90.7MM) | |
100MM (ID: 116.0MM) | 125MM (ID: 144.0MM) | |
150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
250MM (ID: 276.2MM) | 300MM (ID: 327.0MM) | |
350MM (ID: 359.2MM) | 400MM (ID: 410.4MM) | |
450MM (ID: 416.8MM) | 500MM (ID: 513.1MM) | |
600MM (ID: 615.9MM) | 600MM (ID: 717.55MM) | |
800MM (ID: 819.15MM) | 1000MM (ID: 1019.0MM) |
ALFRAN Carbon Steel (SCH 40) Seamless 90° Bend
RM2.92 – RM1,727.05
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 40) Seamless 40mm~80mm Concentric Reducer
RM4.81 – RM11.70
Pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. A concentric reducer works the same way as eccentric, but resembles a cone and keeps fluid or gas more centered, whereas eccentric reducers have a parallel edge, which results in an offsetting center.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless Concentric Reducer
RM14.23 – RM200.07
Pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. A concentric reducer works the same way as eccentric, but resembles a cone and keeps fluid or gas more centered, whereas eccentric reducers have a parallel edge, which results in an offsetting center.
Alfran SGP, SCH 40 Fittings
ALFRAN Carbon Steel (SCH 80) Seamless Eccentric Reducer
An eccentric reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Eccentric reducers are used if the same top or bottom level of the pipe is required.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP 45° Bend
RM2.24 – RM2,785.76
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Alfran SGP, SCH 40 Fittings
ALFRAN C.S SGP End Cap – SCH Std.
End Cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw onto the male end of the pipe. It can also be welded on to close the end of the pipe.
Alfran SGP, SCH 40 Fittings
ALFRAN Seamless Carbon Steel SCH 40 Pipe
RM41.00 – RM3,699.00
Carbon steel pipe is used in applications that do not require the pipe to be galvanized. It is manufactured without a seam and requires very little maintenance. Carbon steel pipe can be cut and threaded to fit your needs.
Pipe Type | Seamless Pipe |
Pressure Class | SCH 40 |
Body Material | Carbon Steel |
Nominal Diameter | Ø9mm ~Ø600mm |
Pipe Length | 6 Meters |
Specification | API 5L Gr.B ASTM A106 Gr.B |