INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
SCI 15mm~25mm G.I Valve Socket
RM2.24 – RM4.78
Sockets are fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM14.79 – RM43.88
Flanges are pipe fittings that are used to connect pipes or fittings together to perform different functions.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
ALFRAN M.S Sprinklet Socket (15mm~32mm)
RM4.25 – RM6.29
Sprinklet Socket (Coupolet) is Olets with female NPT thread that uses for low-pressure This will reduce the use of one socket and one coupling.
ALFRAN M.S Sprinklet Socket (40mm~100mm)
RM6.97 – RM76.50
Sprinklet Socket (Coupolet) is Olets with female NPT thread that uses for low-pressure This will reduce the use of one socket and one coupling.
RM1.88 – RM30.01
45° Elbow elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
RM1.36 – RM56.91
90° Elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
TSP 15mm~100mm G.I Equal Socket
RM1.22 – RM14.07
Equal Sockets are used to connect two pieces of pipe of the same diameter together.
TSP 15mm~100mm G.I Hexagonal Nipple
RM1.26 – RM31.40
Hexagon Nipples are threaded on both ends and are used to connect to two female threaded ABS fittings or valves of the same diameter.
RM1.28 – RM16.99
Lock nuts are used for fastening glands to gland plate. These are available in entry threads ranging from different sizes.
S2S Stainless Steel End Cap S/E
RM1.80 – RM50.22
Cap covers the end of a pipe. Pipe caps are used at the dead end of the piping system. It is also used in piping headers for future connections.
RM0.87 – RM19.25
Plugs are used to seal the end (closing) of a female threaded pipe fitting of the same diameter.
S2S Stainless Steel Cross Tee S/E
Cross is also known as four-way pipe fitting. A cross has one inlet and three outlets (or vice versa). Generally, crosses are not used in process piping to transport fluid. Cross-type fittings contain 4 openings in 4 directions. These are connected when there are 4 pipes are meeting at a point.
S2S Stainless Steel 45° Elbow S/E
RM2.94 – RM87.78
45° Elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
RM1.26 – RM24.91
The cap covers the end of a pipe. End caps are used at the dead-end of the piping system. It is also used in piping headers for future connections. Seals the threaded end of the pipe.
TSP 15mm~100mm G.I Union Coupling
RM4.88 – RM71.75
Union Couplings are pipe fitting used to connect two pieces of pipe of the same diameter with a mechanism that allows the pipes to be separated if necessary.
S2S Stainless Steel 90° Elbow S/E
RM2.28 – RM95.40
90° Elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
S2S Stainless Steel Hex. Bushing S/E
RM1.98 – RM15.00
Bushings as pipe fittings combine different pipe sizes together. They decrease the larger size to the size of the smaller pipe. In comparison to a union or coupling, Bushings occupy very little space.
TSP 15mm~50mm G.I Street Elbow
RM1.84 – RM19.20
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
RM6.26 – RM61.02
Cross tee is also known as four-way pipe fitting. A cross has one inlet and three outlets (or vice versa). Generally, crosses are not used in process piping to transport fluid.
(S2S) Stainless Steel Hex. Nipple S/E
RM2.25 – RM56.52
The nipple is a short stub of a pipe consisting of a short straight piece of pipe, usually provided with male pipe thread at both ends, for connecting two other female threaded fittings or pipes.
RM8.74 – RM34.84
The primary purpose of a Tee is to make a 90° branch from the main run of pipe. The Unequal Tee (or reducing Tee) is used as the branch has a smaller diameter as the run-pipe.
RM1.38 – RM4.38
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
RM1.56 – RM21.00
Plug is a component of plumbing component which is generally used to close pipe opening during inspections and repairs. Plug are generally contains male threads.
S2S Stainless Steel Reducing Elbow S/E
RM5.76 – RM23.40
Reducing 90° Elbow, designed to change direction as well as reduce the size of the pipe within a piping system. The reducing elbow eliminates one pipe fitting and reduces the welding by more than one-third.
RM6.29 – RM16.07
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
TSP 20mm~65mm G.I Reducing Elbow
RM2.29 – RM39.64
A reducing elbow is fitting used to join two pieces of pipe of different sizes. The reducing elbow is so-called because it looks like a reducing piece and elbow combined into one.
S2S Stainless Steel Reducing Nipple S/E
RM3.60 – RM17.40
The reducing nipple is a short stub of a pipe consisting of a short straight piece of pipe, usually provided with male pipe thread at both ends, for connecting two different sizes female threaded fittings or pipes.
ALFRAN Carbon Steel ANSI 150LBS Slip-On Flange R/F (SORF)
RM10.53 – RM1,520.10
Slip-On Flanges are a popular low-cost flange type for low-pressure applications. The flange simply slides onto the pipe where two fillet welds, one on the outside and the other on the inside, seal and fasten the connection.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.7MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
| 65MM (ID: 74.6MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.0MM) | 125MM (ID: 144.0MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
| 250MM (ID: 276.2MM) | 300MM (ID: 327.0MM) | |
| 350MM (ID: 359.2MM) | 400MM (ID: 410.4MM) | |
| 450MM (ID: 416.8MM) | 500MM (ID: 513.1MM) | |
| 600MM (ID: 615.9MM) | 600MM (ID: 717.55MM) | |
| 800MM (ID: 819.15MM) | 1000MM (ID: 1019.0MM) | |
ALFRAN Carbon Steel ANSI 150LBS Slip-On Blind Flange R/F (SORF)
RM77.40 – RM3,267.00
Blind Flanges are well suited for high temperature and pressure applications. manufactured without a bore, Blind Flanges are used to blank off the ends of pipes, valves and pressure vessel openings.
TSP 20mm~65mm G.I Reducing Tee
RM3.42 – RM34.84
Reducing Tees are pipe fitting used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
S2S Stainless Steel Reducing Socket S/E
RM2.58 – RM14.88
A reducer is a pipe fitting component that reduces the flow size from larger to smaller by reducing the size of pipe.
S2S Stainless Steel Reducing Street Elbow S/E
The reducing street elbow designed to change direction as well as reduce the size of the pipe within a piping system. The reducing elbow eliminates one pipe fitting and reduces the welding by more than one-third.
TSP 20mm~65mm G.I Reducing Socket
RM1.90 – RM19.37
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
S2S Stainless Steel Reducing Tee S/E
RM7.50 – RM64.80
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
S2S Stainless Steel Equal Socket
RM2.70 – RM70.80
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
TSP 25mm~100mm G.I Flange c/w Holes – Table ‘E’
RM6.79 – RM24.37
Flanges are pipe fittings that are used to connect pipes or fittings together to perform different functions.
S2S Stainless Steel Equal Socket – Smooth (Full-threaded)
RM2.70 – RM43.80
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
S2S Stainless Steel Street Elbow S/E
RM3.36 – RM25.68
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
S2S Stainless Steel Equal Tee S/E
RM2.94 – RM130.80
Equal Tees are used to connect three pieces of pipe of the same diameter to form a T-shape. It is having one inlet and two outlets, outlets are arranged at 90 degrees to the mainline connection (inlet). It can also be used to combine the flow from two inlets to one outlet.
S2S Stainless Steel Union Coupling S/E
RM6.90 – RM43.20
A Pipe Coupling or Coupler plays an important role in connecting the pipe sections while maintaining the integrity of the pipes in the process. Pipe Coupling is a very short length of pipe or tube.
S2S Stainless Steel M/F Threaded Socket S/E
RM3.60 – RM7.68
Socket with one female threaded and the other end is male threaded, used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
YODOSHI 20mm~80mm G.I 45° Elbow
RM2.44 – RM36.24
45° elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
304 Stainless Steel (SCH 10) BW 45° Elbow
RM12.60 – RM1,575.00
Stainless steel 45-degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules.
YODOSHI 15mm~40mm G.I 90° Elbow
90° elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
304 Stainless Steel (SCH 10) BW 90° Long Radius Elbow
RM6.75 – RM1,530.00
The stainless steel 90-degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. 90-degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe.
YODOSHI 20mm~50mm G.I Reducing Elbow
RM3.02 – RM8.80
A reducing elbow is a type of fitting which is used to join two pieces of pipe of different sizes. The reducing elbow is so-called because it looks like a reducing piece and elbow combined into one.
YODOSHI 20mm~32mm G.I Street Elbow
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
304 Stainless Steel (SCH 10) BW End Cap
RM15.30 – RM37.80
Stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw onto the male end of the pipe. It can also be welded on to close the end of the pipe.
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- DUCTILE IRON FITTINGS (23)
- GALV. IRON T/E FITTINGS (125)
- STAINLESS STEEL FITTINGS (102)
- STEAM T/E FITTINGS (45)
- C.S WELDED SGP FITTINGS (36)
- C.S SEAMLESS SCH FITTINGS (15)
- MILD STEEL FITTINGS (5)
- M.S.C.L FITTINGS (15)
- MECHANICAL FITTINGS (89)
- COPPER FITTINGS (70)
- PVC & PE FITTINGS (89)
- VITRIFIED CLAY FITTINGS (6)
- FIRE PROTECTION (26)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
