[block id=”106839″]
ALFRAN Mild Steel (BS10) Table ‘E’ Flange – Forged
Price range: RM16.20 through RM133.65
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system. It offers impressive mechanical performance as a connecting part.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 166.6MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 269.5MM) | |
| 300MM (ID: 321.0MM) | ||
ALFRAN Mild Steel PN16 Flange R/F (EN 1092-1) – Forged
Price range: RM22.27 through RM175.50
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system.
R/F is Raised Face. The flange face is the surface area that hosts the gasket.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 167.0MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 270.0MM) | |
| 300MM (ID: 321.0MM) | ||
ALFRAN Mild Steel (JIS 10K) Flange – Forged
Price range: RM18.72 through RM213.30
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 166.6MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 269.5MM) | |
| 300MM (ID: 321.0MM) | 350MM (ID: 358.1MM) | |
ALFRAN MS flanges are mild steel flanges suitable for general-purpose piping and structural applications. These flanges are used in low-pressure systems and fabrication works where weldability and cost-efficiency are important.