Steel Sheet Piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into.
Hat-Type Steel Sheet Pile
Price range: RM5,185.20 through RM8,280.00
- Superb Drivability The large sectional area of the Hat-type sheet pile realizes superior drivability.
- High Structural Reliability No reduction is required in sectional properties to consider the possible lack of shear force transmission at the interlocks, which is true for U-type steel sheet piles.
- Excellent Cost-Effectiveness The amount of steel per unit wall can be reduced, resulting in improved total cost.
| Type | SP-10H, SP-25H & SP-45H |
| Effective Width | 900mm |
| Effective Height | 230mm, 300mm & 368mm |
| Pile Length | 12 meters |
Steel Sheet Pile SP-II
Price range: RM2,160.00 through RM2,880.00
- U-type sections have been widely used for various types of permanent and temporary structures, and are one of the most familiar sheet piles among both designers and users.
- SP-Ⅱ,ⅢA,Ⅳare solidly designed. These sections are especially suitable for repeated use, and have acquired high market acceptance from users.
- U-type sections offer section modulus ranging from 874 cm3/m to 3,820 cm3/m.
| Type | SP-Ⅱ |
| Effective Width | 400mm |
| Effective Height | 100mm |
| Pile Length | 9 & 12 meters |
Steel Sheet Pile SP-IIIA
Price range: RM1,752.00 through RM4,380.00
- U-type sections have been widely used for various types of permanent and temporary structures, and are one of the most familiar sheet piles among both designers and users.
- SP-Ⅱ,ⅢA,Ⅳ, are solidly designed. These sections are especially suitable for repeated use, and have acquired high market acceptance from users.
- U-type sections offer section modulus ranging from 874 cm3/m to 3,820 cm3/m.
| Type | SP-ⅢA |
| Effective Width | 400mm |
| Effective Height | 150mm |
| Pile Length | 6, 9, 12 & 15 meters |
Steel Sheet Pile SP-IV
Price range: RM2,283.00 through RM4,566.00
- U-type sections have been widely used for various types of permanent and temporary structures, and are one of the most familiar sheet piles among both designers and users.
- SP-Ⅱ,ⅢA,Ⅳ are solidly designed. These sections are especially suitable for repeated use, and have acquired high market acceptance from users.
- U-type sections offer section modulus ranging from 874 cm3/m to 3,820 cm3/m.
| Type | SP-Ⅳ |
| Effective Width | 400mm |
| Effective Height | 170mm |
| Pile Length | 6, 9 & 12 meters |
Sheet piles are steel profiles with interlocking edges used in earth retention and excavation support systems. They are driven into the ground to retain soil or water, commonly used in marine works, basements, and foundation wall systems.