Mild Steel Cement Lining (MSCL) is made by coating the internal section with mortar-like compound which acts as a barrier between Carbon Steel & the Process. MSCL Pipe & Fitting is usually used in the transmission of potable water & Sewage application.


Product Brands

Product Accessories Sizes

M.S.C.L 45° Bend – Plain End BS

RM73.00RM215.00
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.

M.S.C.L 45° Bend – Plain End (Painted) BS

RM73.00RM86.00
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.

M.S.C.L 90° Bend – Plain End BS

RM83.00RM420.00
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.

M.S.C.L 90° Bend – Plain End (Painted) BS

RM83.00RM255.00
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.

M.S.C.L Collar Joint BS

RM13.00RM60.00
Collar joint is mostly used for joining big diameter concrete and asbestos cement pipes. The ends of the two pipes are brought in one level before each other. Then rubber gasket between steel rings or jute- rope soaked in cement is kept in the grove and the collar is placed at the joint so that it should have the same lap on both the pipes.

M.S.C.L Reducer Taper – Plain End BS

RM48.00RM193.00
Reducing Pieces are used to connect two pipe fittings together, where one size is smaller than the other pipe.

M.S.C.L Reducer Taper – Plain End (Painted) BS

RM98.00
Reducing Pieces are used to connect two pipe fittings together, where one size is smaller than the other pipe.

M.S.C.L Equal Tee – Plain End BS

RM68.00RM198.00
Tee is a most common pipe fitting which use to connect 3 lengths of pipe. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the mainline. Equal Tee: The branch size is similar to the main pipe size.

M.S.C.L Reducing Tee – Plain End BS

RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.

M.S.C.L Equal Tee – Plain End (Painted) BS

RM68.00RM320.00
Tee is a most common pipe fitting which use to connect 3 lengths of pipe. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the mainline. Equal Tee: The branch size is similar to the main pipe size.

M.S.C.L Reducing Tee – Plain End (Painted) BS

RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.