CITY 1/2"-3/4" Brass Elbow (F/F)
Price range: RM3.38 through RM5.10
M.S.C.L Equal Tee - Plain End (Painted) BS
Price range: RM68.00 through RM320.00
M.S.C.L Reducing Tee – Plain End (Painted) BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
Shipping & Delivery
Related products
M.S.C.L 90° Bend – Plain End (Painted) BS
Price range: RM83.00 through RM255.00
M.S.C.L Flange Adaptor – Single Flange BS
Price range: RM90.00 through RM126.00
M.S.C.L Reducing Tee – Plain End BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
M.S.C.L Off-Take Tee – Single Flange BS
Price range: RM120.00 through RM222.00
SCI STEAM 100mm Reducing Tee S/E
Original price was: RM150.00.RM97.50Current price is: RM97.50.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM134.00.RM100.50Current price is: RM100.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Threaded Outlet (012) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM97.50 through RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized