-25%
VISION 250mm Mech. Reducing Tee - Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
VISION 150mm Mech. Reducing Tee - Grooved End (011) BS
Price range: RM118.50 through RM150.00
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Shipping & Delivery
Related products
VISION Grooved Mechanical 90° Standard Elbow (002L) BS
Price range: RM18.75 through RM162.75
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Short Equal Tee (004)
Price range: RM32.25 through RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Tee Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM134.00.RM100.50Current price is: RM100.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM163.00.RM122.25Current price is: RM122.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) API
Price range: RM17.60 through RM88.80
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Standard Flexible Coupling (101) BS
Price range: RM16.00 through RM63.20
Style 101 flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Ultra Grooved Mechanical Flexible Coupling (UG28)
Price range: RM1,880.00 through RM2,040.00
UG28 Ultra Grooved Flexible Coupling is suitable for flexible connection for HVAC, circulating cooling water, heating, buried pipe systems. The key section of UGS flexible couplings is designed to have a small gap to the UGS groove width and depth. They provide both axial flexibility and angular deflection.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 750 PSI (5.2MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Snap-Joint Coupling (S23) BS
Price range: RM56.00 through RM192.00
Style S23 Snap-Joint Coupling is designed with a handle to assemble and tight lock, create a flexible connection in both angular and axial direction by keeping a certain gap between housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 750 PSI (5.2MPa)
- Surface: Red paint/ Hot-dip galvanized