M.S.C.L 90° Bend - Plain End (Painted) BS
Price range: RM83.00 through RM255.00
M.S.C.L 45°Bend - Double Flange BS
RM255.60
M.S.C.L 90° Bend – Plain End BS
Price range: RM83.00 through RM420.00
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Shipping & Delivery
Related products
M.S.C.L 90° Bend – Double Flange BS
RM273.60
M.S.C.L Flange Adaptor – Single Flange BS
Price range: RM90.00 through RM126.00
M.S.C.L Off-Take Tee – Single Flange BS
Price range: RM120.00 through RM222.00
VISION 100mm Mechanical Tee – Grooved Outlet (301) BS
Price range: RM46.35 through RM54.00
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 50mm Mechanical Tee – Threaded Outlet (302) BS
Original price was: RM50.50.RM37.87Current price is: RM37.87.
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM36.07 through RM37.87
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM60.75 through RM77.25
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
BRC ‘A’ Full-Spec (6M x 2.2M) Wire Mesh (BS-MS145:2014)
Price range: RM128.70 through RM571.43
Standard sheet manufactured in sheet form which is 6.00 meters length by 2.20 meters width.
METEX STEEL - Catalogue
SSM Mesh - Catalogue
KAMEN Steel - Catalogue
| Size | A, B, C and DA |
| Grade | Grade 485 & 500 |
| Specification | BS - MS145: 2014 |