Back to products
M.S.C.L Flange Adaptor - Single Flange BS
Price range: RM90.00 through RM126.00
M.S.C.L Reducer Taper – Plain End BS
Price range: RM48.00 through RM193.00
Reducing Pieces are used to connect two pipe fittings together, where one size is smaller than the other pipe.
Shipping & Delivery
Related products
M.S.C.L 45°Bend – Double Flange BS
RM255.60
VISION 80mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM38.25 through RM39.75
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM60.75 through RM77.25
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM107.25 through RM112.50
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized