-25%
VISION 65mm Mechanical Tee - Threaded Outlet (302) BS
Price range: RM36.07 through RM37.87
VISION Mechanical Tee - Threaded Outlet (302) API
Price range: RM36.07 through RM86.25
VISION 50mm Mechanical Tee – Threaded Outlet (302) BS
Original price was: RM50.50.RM37.87Current price is: RM37.87.
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Shipping & Delivery
Related products
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM134.00.RM100.50Current price is: RM100.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Threaded Outlet (012) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) BS
Price range: RM13.60 through RM41.60
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Reducing Coupling (020) BS
Price range: RM44.80 through RM104.00
Style 020 Reducing Flexible Coupling is designed with a flat-pad, to create the flexibility of the pipeline in both axial and angular direction, by keeping a certain gap between the housing key and pipe groove. Reducing Flexible Coupling is an alternative and economic option to replace a combination of two couplings and a concentric reducer.
The unique G02 "C" shape gasket performs triple sealing functions with tested and proven compression set and pocket volumetric, which maintains enough seal function when the coupling is deflected.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Heavy-Duty Flexible Coupling (101H) BS
Price range: RM46.08 through RM728.00
Style 101H Heavy-Duty flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM39.45 through RM50.25
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM60.75 through RM77.25
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM107.25 through RM112.50
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized