M.S.C.L Off-Take Tee - Single Flange BS
Price range: RM120.00 through RM222.00
M.S.C.L Equal Tee - Plain End BS
Price range: RM68.00 through RM198.00
M.S.C.L Reducing Tee – Plain End BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
Shipping & Delivery
Related products
M.S.C.L 45° Bend – Plain End BS
Price range: RM73.00 through RM215.00
M.S.C.L 45° Bend – Plain End (Painted) BS
Price range: RM73.00 through RM86.00
M.S.C.L 45°Bend – Double Flange BS
RM255.60
M.S.C.L 90° Bend – Plain End (Painted) BS
Price range: RM83.00 through RM255.00
M.S.C.L Collar Joint BS
Price range: RM13.00 through RM60.00
Collar joint is mostly used for joining big diameter concrete and asbestos cement pipes. The ends of the two pipes are brought in one level before each other. Then rubber gasket between steel rings or jute- rope soaked in cement is kept in the grove and the collar is placed at the joint so that it should have the same lap on both the pipes.
M.S.C.L Reducing Tee – Plain End (Painted) BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
VISION 200mm Mechanical Tee – Grooved Outlet (301) BS
Original price was: RM196.00.RM147.00Current price is: RM147.00.
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
ART.1010: 1/2″ B.S Brass Bib Tap
Original price was: RM29.00.RM22.62Current price is: RM22.62.
STANDARD: BS EN 200:2008
CITY - Forging Brass Bib Tap
| ART NO. | SIZES | PACKING |
|---|---|---|
| 1010 | 1/2" (15mm) | 144 pcs/Box |