M.S.C.L Collar Joint BS
Price range: RM13.00 through RM60.00
M.S.C.L 90° Bend - Plain End (Painted) BS
Price range: RM83.00 through RM255.00
M.S.C.L 90° Bend – Double Flange BS
RM273.60
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Shipping & Delivery
Related products
M.S.C.L 45° Bend – Plain End BS
Price range: RM73.00 through RM215.00
M.S.C.L Collar Joint BS
Price range: RM13.00 through RM60.00
Collar joint is mostly used for joining big diameter concrete and asbestos cement pipes. The ends of the two pipes are brought in one level before each other. Then rubber gasket between steel rings or jute- rope soaked in cement is kept in the grove and the collar is placed at the joint so that it should have the same lap on both the pipes.
M.S.C.L Off-Take Tee – Single Flange BS
Price range: RM120.00 through RM222.00
VISION 100mm Mechanical Tee – Grooved Outlet (301) BS
Price range: RM46.35 through RM54.00
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mechanical Tee – Grooved Outlet (301) BS
Original price was: RM196.00.RM147.00Current price is: RM147.00.
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM60.75 through RM77.25
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mechanical Tee – Threaded Outlet (302) BS
Price range: RM107.25 through RM112.50
Mechanical Tee with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Branch: Female thread, NPT/ BSPT
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
BRC ‘A’ Full-Spec (6M x 2.2M) Wire Mesh (BS-MS145:2014)
Price range: RM128.70 through RM571.43
Standard sheet manufactured in sheet form which is 6.00 meters length by 2.20 meters width.
METEX STEEL - Catalogue
SSM Mesh - Catalogue
KAMEN Steel - Catalogue
| Size | A, B, C and DA |
| Grade | Grade 485 & 500 |
| Specification | BS - MS145: 2014 |