SOUTH ASIA EXACT | SYARIKAT LOGAM UNITRADE

RM0.30 – RM2.88

Bush Fittings are sometimes called reducer bushings, are used for connecting two pipes of different sizes. The larger diameter of the bushing fits inside of the larger pipe. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC End Cap

RM0.30 – RM46.80

To cap or seal the end of PVC-U pipe with solvent cement. End caps or stop ends are commonly used in the pipework to dead-end the flow of gas or water. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Class ‘E’ 90° Elbow

RM0.57 – RM1.26

Class-E plastic tube comes with an ambient pressure rating of 15 bar (PN15) and a full operating temperature range of -5°C to 60°C. To solvent weld pipes at both ends. Elbows are pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC 90° Elbow

RM0.60 – RM86.40

To solvent weld pipes at both ends. Elbows are pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC P/T Elbow

RM0.96 – RM5.76

To connect faucet or ball valve to PVC-U water supply line. Threaded at once end and solvent weld to pipe on the other end. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC P/T Socket

RM0.69 – RM17.28

A socket is a fitting that simply goes over the end of a pipe. These fittings are used for solvent cement jointing to UPVC pressure pipes. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Valve Socket

RM0.42 – RM15.84

The valve socket is solvent cement jointed to a pipe spigot. The male-threaded end of the valve socket provides a connection for a PVC, brass or galvanized wrought iron threaded valve-type fitting. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Threaded Plug

RM0.30 – RM2.16

A threaded pipe fitting with male threads; used to close the end of a ferrule or a pipe having female threads. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Reducing Elbow

RM1.20 – RM1.80

Reducing 90° Elbows are a pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees, with one side of the elbow being smaller than the other. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Reducing Socket

RM0.54 – RM21.60

The reducing socket can make parallel connections of two pipes with different diameters. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Reducing Tee

RM1.56 – RM39.60

The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Double End Socket

RM0.39 – RM56.16

The double end socket is can connect two pipe joints of the same nominal diameter to make the pipe in parallel connection. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Socket – S.W.V Type

RM9.90 – RM27.36

The socket can connect two pipe joints of the same nominal diameter to make the pipe in parallel connection. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Equal Tee

RM0.75 – RM36.00

The equal tee connecting the main pipe, leading to one branch, distributes the flow in the main pipe and the branch pipe of the same diameter. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Tank Connector

RM1.56 – RM3.00

A tank connector is a type of leak-proof fitting (sometimes known as a tank inlet or tank outlet) used to create a watertight connection between a pipe and a tank. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Equal Tee – Class ‘E’

RM0.78 – RM1.14

Add to wishlist

uPVC Underground Tee

RM23.40

This tee has a curved center section. In drainage systems, it is primarily used to connect horizontal drains (including fixture trap arms) to vertical drains. The center connection is generally to the pipe leading to a trap (the trap arm). It must not connect a vertical drain to a horizontal drain, because of the likelihood that solids will accumulate at the bottom of the junction and cause a blockage. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

uPVC Underground Socket

RM8.40 – RM26.70

PVC sockets are used to connect two pieces of pressure pipe together. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

uPVC Underground 90° Bend

RM14.40 – RM44.40

90° Bend is for an “offset” change in direction of the piping at 90°. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

uPVC Underground 45° Bend

RM12.00 – RM31.20

45° Bend is for an “offset” change in direction of the piping at 45°. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Boss Connector

RM4.32 – RM21.06

These fittings are used for solvent cement jointing with UPVC SWV pipes. Theses piping system is used for soil and waste discharge pipework for the conveyance of domestic wastewater, ventilating pipe and rainwater pipework. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Bush Reducer

RM1.38 – RM12.48

Reducing bushes are used to reduce the diameter of one end of a pipe fitting. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V 90° Elbow with Inspection Opening (I/O)

RM2.94 – RM47.40

It provides flexibility to change the pipe direction at 90°. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V 45° Elbow

RM1.38 – RM72.00

It provides flexibility to change the pipe direction at 45°. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V 90° Elbow

RM1.38 – RM84.00

It provides flexibility to change the pipe direction at 45° BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Floor Gully Trap c/w Inspection Opening

RM21.60

These traps are constructed outside the building to carry waste water discharge from washbasin, sinks, bathroom etc. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Pipe Sleeve

RM3.90 – RM48.00

A hollow, cylindrical insert placed in the form of a concrete wall at the position where a pipe is to penetrate in order to prevent the flow of concrete into the opening. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V P-Trap – Plain

RM37.50

P-traps are U-shaped pipes in toilets and underneath sinks. P-traps hold a small amount of water that prevents sewer gases from rising up into your home. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V P-Trap c/w Inspection Opening (I/O)

RM11.70 – RM37.50

Add to wishlist

S.W.V Straight Coupler

RM0.84 – RM15.30

Couplers are small fittings used in plumbing to connect two pipes together. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Equal Tee with Inspection Opening

RM4.32 – RM64.80

Tees having branch size equal to run size are called equal tees. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Reducer Tee c/w Inspection Opening (I/O)

RM50.40

The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. This type of pipe fitting can also consider size reduction from one of the run ports to the other. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

RM2.34 – RM60.00

RM1.62 – RM18.00

Used to allow foul gases generated in the system to escape. It is used as a cap on top of the vertical line. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

S.W.V Y-Tee

RM19.50 – RM74.88

Wye tee allows one pipe to be joined to another at a 45° angle. This type of tee reduces friction and turbulence that could hamper the flow. Wye tee is also known as a lateral. BBB - UPVC PIPES & FITTINGS SAE - CATALOGUE CEW SIN PLASTIC - CATALOGUE CHIN LEAN - CATALOGUE

Add to wishlist

PVC Class ‘C’ Pipe – MS 628 / BS 3505

RM104.50 – RM893.00

Plastic pressure piping is used for many industrial processes, in heating and cooling systems, fire protection installations, gas distribution, and for water supply and distribution.

Standard	BS 3505
Model	Class C (PN9)
Color	Grey
Nominal Diameter	Ø80mm ~Ø250mm
Pipe Length	5.8 Meters

BBB - UPVC Pipes & Fittings Cew Sin - Catalogue CHIN LEAN - Catalogue SAE Full Catalogue

Add to wishlist

PVC Class ‘D’ Pipe – MS 628 / BS 3505

RM11.40 – RM1,140.00

Plastic pressure piping is used for many industrial processes, in heating and cooling systems, fire protection installations, gas distribution, and for water supply and distribution.

Standard	BS 3505
Model	Class D (PN12)
Color	Grey
Nominal Diameter	Ø15mm ~Ø250mm
Pipe Length	5.8 Meters

BBB - UPVC Pipes & Fittings Cew Sin - Catalogue CHIN LEAN - Catalogue SAE Full Catalogue

Add to wishlist

PVC Class ‘E’ Pipe – MS 628 / BS 3505

RM13.30 – RM862.60

Plastic pressure piping is used for many industrial processes, in heating and cooling systems, fire protection installations, gas distribution, and for water supply and distribution.

Standard	BS 3505
Model	Class E (PN15)
Color	Grey
Nominal Diameter	Ø15mm ~Ø200mm
Pipe Length	5.8 meters

BBB - UPVC Pipes & Fittings Cew Sin - Catalogue CHIN LEAN - Catalogue SAE Full Catalogue

Add to wishlist

PVC Class ‘7’ Pipe – MS 762 / BS 3506

RM23.75 – RM103.55

Plastic pressure piping is used for many industrial processes, in heating and cooling systems, fire protection installations, gas distribution, and for water supply and distribution.