C.S SCH 40/80 - Supplier Malaysia | SYARIKAT LOGAM UNITRADE

“Schedule 40” & “Schedule 80” refer to the thickness of the walls of pipes. “Schedule” is the standard of wall thickness that has been adopted by the American National Standards Institute.

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 45° Bend

RM2.92 – RM1,483.95

45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 90° Bend

RM2.92 – RM1,727.05

90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless End Cap

RM7.28 – RM377.00

End Cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw onto the male end of the pipe. It can also be welded on to close the end of the pipe. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless Equal Tee

RM8.84 – RM1,402.70

Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 25mm~80mm Reducing Tee

RM17.35 – RM53.30

The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 100mm~300mm Reducing Tee

RM68.25 – RM1,173.90

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 40mm~80mm Concentric Reducer

RM4.81 – RM11.70

Pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. A concentric reducer works the same way as eccentric, but resembles a cone and keeps fluid or gas more centered, whereas eccentric reducers have a parallel edge, which results in an offsetting center. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless 100mm~300mm Concentric Reducer

RM15.60 – RM191.10

Add to wishlist

ALFRAN Carbon Steel (SCH 40) Seamless Eccentric Reducer

RM27.95 – RM284.70

An eccentric reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Eccentric reducers are used if the same top or bottom level of the pipe is required. Alfran SGP, SCH 40 Fittings

Add to wishlist

ALFRAN Carbon Steel (SCH 80) Seamless 90° Bend

RM3.56 – RM754.65

90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating. Alfran SGP, SCH 40 Fittings