INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
Home » Galvanized Iron
RM1.78 – RM77.36
45° elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM1.29 – RM215.34
90° elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM1.83 – RM261.96
The primary purpose of a Tee is to make a 90° branch from the main run of pipe. The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM8.29 – RM15.50
The primary purpose of a Tee is to make a 90° branch from the main run of pipe. The Unequal Tee (or reducing Tee) is used as the branch has a smaller diameter as the run-pipe.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM5.93 – RM149.78
Cross tee is also known as four-way pipe fitting. A cross has one inlet and three outlets (or vice versa). Generally, crosses are not used in process piping to transport fluid.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~150mm G.I Equal Socket
RM1.15 – RM109.52
Equal Sockets are used to connect two pieces of pipe of the same diameter together.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~150mm G.I Hex. Nipple
RM1.20 – RM140.60
A pipe fitting nipple is defined as a short stub of pipe that has external male pipe threads at each end, for connecting to other fittings. Nipples are commonly used for plumbing and hose fittings to regulate the flow of fluids in tanks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM0.84 – RM16.12
Lock nuts are used for fastening glands to gland plate. These are available in entry threads ranging from different sizes.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Pipe Plug is used at high-pressure areas where the flow needs to be controlled. It is a perfect use for a tight hold on joints and sturdy support.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM0.83 – RM30.09
Pipe Plug is used at high-pressure areas where the flow needs to be controlled. It is a perfect use for a tight hold on joints and sturdy support.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM1.20 – RM34.38
The cap covers the end of a pipe. End caps are used at the dead-end of the piping system. It is also used in piping headers for future connections. Seals the threaded end of pipe.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~100mm G.I Union Coupling
RM4.63 – RM131.61
Unions are fitting used to connect two pieces of pipe of the same diameter with a mechanism that allows the pipes to be separated if necessary.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM1.31 – RM5.96
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM15.24 – RM31.83
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 32mm~65mm G.I Reducing Cross Tee
RM16.00 – RM57.89
Reducing Cross Pipe Fitting are the fittings that interface or connect different pipes together and permits to convert the way and department. There is moreover encourages the development of fluid in a secure way.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 20mm~65mm G.I Reducing Elbow
RM2.17 – RM37.61
A reducing elbow is a type of fitting which is used to join two pieces of pipe of different sizes. The reducing elbow is so-called because it looks like a reducing piece and elbow combined into one.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~50mm G.I Reducing Nipple
RM2.49 – RM14.34
Reducing Nipple is used to reduce the flow and connects to another Pipe.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 20mm~100mm G.I Reducing Socket
RM1.81 – RM48.98
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~50mm G.I Short Bend M/F
RM3.60 – RM22.90
Short Radius Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~50mm G.I Street Elbow
RM1.75 – RM18.21
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
SCI 15mm~25mm G.I Valve Socket
RM2.24 – RM4.78
Sockets are fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM14.79 – RM43.88
Flanges are pipe fittings that are used to connect pipes or fittings together to perform different functions.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
RM1.88 – RM30.01
45° Elbow elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
RM1.36 – RM56.91
90° Elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
TSP 15mm~100mm G.I Equal Socket
RM1.22 – RM14.07
Equal Sockets are used to connect two pieces of pipe of the same diameter together.
TSP 15mm~100mm G.I Hexagonal Nipple
RM1.26 – RM31.40
Hexagon Nipples are threaded on both ends and are used to connect to two female threaded ABS fittings or valves of the same diameter.
RM1.28 – RM16.99
Lock nuts are used for fastening glands to gland plate. These are available in entry threads ranging from different sizes.
RM0.87 – RM19.25
Plugs are used to seal the end (closing) of a female threaded pipe fitting of the same diameter.
RM1.26 – RM24.91
The cap covers the end of a pipe. End caps are used at the dead-end of the piping system. It is also used in piping headers for future connections. Seals the threaded end of the pipe.
TSP 15mm~100mm G.I Union Coupling
RM4.88 – RM71.75
Union Couplings are pipe fitting used to connect two pieces of pipe of the same diameter with a mechanism that allows the pipes to be separated if necessary.
TSP 15mm~50mm G.I Street Elbow
RM1.84 – RM19.20
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
RM6.26 – RM61.02
Cross tee is also known as four-way pipe fitting. A cross has one inlet and three outlets (or vice versa). Generally, crosses are not used in process piping to transport fluid.
RM8.74 – RM34.84
The primary purpose of a Tee is to make a 90° branch from the main run of pipe. The Unequal Tee (or reducing Tee) is used as the branch has a smaller diameter as the run-pipe.
RM1.38 – RM4.38
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
RM6.29 – RM16.07
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
TSP 20mm~65mm G.I Reducing Elbow
RM2.29 – RM39.64
A reducing elbow is fitting used to join two pieces of pipe of different sizes. The reducing elbow is so-called because it looks like a reducing piece and elbow combined into one.
TSP 20mm~65mm G.I Reducing Tee
RM3.42 – RM34.84
Reducing Tees are pipe fitting used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
TSP 20mm~65mm G.I Reducing Socket
RM1.90 – RM19.37
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
TSP 25mm~100mm G.I Flange c/w Holes – Table ‘E’
RM6.79 – RM24.37
Flanges are pipe fittings that are used to connect pipes or fittings together to perform different functions.
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
