INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
SCI Steam Fittings
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
SCI Steam Fittings
The bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and outer circumferences. Like a reducer, a double-tapped bushing has two threads of different sizes.
SCI Steam Fittings
SCI STEAM 9mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 15mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 20mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 25mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 32mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 40mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 50mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 65mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 80mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 100mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 9mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 15mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 20mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 25mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 32mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 40mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 50mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 65mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 80mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 100mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
RM50.16 – RM220.00
This 45° vitrified clay bend is designed to create a change in direction along a clay pipeline.
RM50.16 – RM220.00
This 90° vitrified clay bend is designed to create a change in direction along a clay pipeline.
SUNWAY Vitrified Clay 45° Bends
RM58.88 – RM262.20
This 45° vitrified clay bend is designed to create a change in direction along a clay pipeline.
KERAMO - Vitrified Clay Pipe
SUNWAY Vitrified Clay 90° Bend
RM58.88 – RM262.20
This 90° vitrified clay bend is designed to create a change in direction along a clay pipeline.
KERAMO - Vitrified Clay Pipe
SUNWAY Vitrified Clay Tee Junction
RM121.44 – RM460.00
This vitrified clay, Tee junction is designed to create a 90-degree branch (of equal diameter) from a clay pipeline.
KERAMO - Vitrified Clay Pipe
SUNWAY Vitrified Clay Wye Junction
RM121.44 – RM460.00
This vitrified clay, Wye (Y) junction is designed to create a 45-degree branch (of equal diameter) from a clay pipeline.
KERAMO - Vitrified Clay Pipe
VISION Grooved Mechanical 90° Short Elbow (002) BS
RM17.77 – RM108.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Short Elbow (002) API
RM22.27 – RM217.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Short Elbow (002) JIS
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) BS
RM18.75 – RM162.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) API
RM300.00 – RM831.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) JIS
RM300.00 – RM831.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 90° Standard Elbow (002L) API/JIS
RM2,176.50 – RM3,375.00- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Short Elbow (003) BS
RM17.77 – RM1,275.00- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Short Elbow (003) API
RM99.00 – RM463.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Short Elbow (003) JIS
RM217.50 – RM463.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 45° Standard Elbow (003L)
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical 22.5° Standard Elbow (0031)
RM37.50 – RM202.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION Grooved Mechanical End Cap (005) BS
RM30.97 – RM78.37- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical End Cap (005) API
RM30.97 – RM153.75- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mechanical End Cap (005) JIS
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. End Cap with Hole (005H)
RM27.00 – RM88.50- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Centre Hole: Female thread, NPT/ BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Sizes: |
|---|---|
| BS | 50mm, 65mm (76.1), 80mm, 100mm, 125mm (139.7), 150mm (165.1) |
| API | 65mm (73.0), 150mm (168.3), 200mm (219.1) |
| JIS | 200mm (216.3) |
VISION 65mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standard: | Reducer Sizes: |
|---|---|
| BS: 65mm(76.1) | 40mm, 50mm |
| API: 65mm(73.0) | 50mm |
VISION 80mm Grooved Mech. Concentric Reducer (008)
RM24.00 – RM37.12
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 40mm, 50mm, 65mm(76.1) |
| API | 65mm(73.0) |
VISION 100mm Grooved Mech. Concentric Reducer (008)
RM35.85 – RM45.00
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 40mm, 50mm, 65mm(76.1), 80mm |
| API | 65mm(73.0) |
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- DUCTILE IRON FITTINGS (23)
- GALV. IRON T/E FITTINGS (125)
- STAINLESS STEEL FITTINGS (102)
- STEAM T/E FITTINGS (45)
- C.S WELDED SGP FITTINGS (36)
- C.S SEAMLESS SCH FITTINGS (15)
- MILD STEEL FITTINGS (5)
- M.S.C.L FITTINGS (15)
- MECHANICAL FITTINGS (89)
- COPPER FITTINGS (70)
- PVC & PE FITTINGS (89)
- VITRIFIED CLAY FITTINGS (6)
- FIRE PROTECTION (26)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
