INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
VISION 125mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 125mm(139.7) | 65mm(76.1), 80mm, 100mm |
VISION 150mm Grooved Mech. Concentric Reducer (008)
RM72.60 – RM337.50
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 150mm(165.1) | 32mm, 50mm, 65mm, 80mm, 100mm, 125mm(139.7) |
| API: 150mm(168.3) | 65mm(73.0), 80mm, 100mm |
VISION 200mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 200mm(216.1) | 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| API: 200mm(219.1) | 80mm(88.9), 150mm(168.3) |
VISION 250mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 250mm(267.4) | 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1), 200mm(216.3) |
| API: 250mm(273.0) | 200mm(219.1) |
VISION 300mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3), 250mm(267.4) |
VISION 350mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 150mm(165.1), 250mm(267.4) |
| API | 250mm(273.0) |
| JIS | 300mm(318.5) |
VISION 400mm Grooved Mech. Concentric Reducer (008)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| JIS: 400mm(406.4) | 300MM(318.5), 350mm(355.6) |
VISION 50mm Threaded Mech. Concentric Reducer (009)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 50mm | 20, 25mm, 32mm, 40mm |
VISION 65mm Threaded Mech. Concentric Reducer (009)
RM37.50 – RM41.25
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 65mm(76.1) | 20, 25mm, 32mm, 40mm, 50mm |
| API: 65mm(73.0) | 20, 25mm, 32mm, 40mm, 50mm |
VISION 80mm Threaded Mech. Concentric Reducer (009)
RM34.50 – RM45.00
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 25mm, 32mm, 40mm, 50mm, 65mm(76.1) |
| API | 65MM(73.0) |
VISION 100mm Threaded Mech. Concentric Reducer (009)
RM43.50 – RM52.50
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 100mm(114.3) | 25mm(33.4), 32mm(42.2), 40mm, 50mm, 65mm(76.1) |
VISION 150mm Threaded Mech. Concentric Reducer (009)
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 150mm(165.1) | 25mm(33.4), 32mm(42.2), 40mm(48.3), 50mm(60.3), 125mm(139.7) |
| API: 150mm(168.3) | 65mm(73.0) |
VISION 65mm Mech. Cross Tee – Threaded Outlet (304) BS
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Cross Tee – Threaded Outlet (304) BS
RM69.75 – RM75.00
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Cross Tee – Threaded Outlet (304) BS
RM71.25 – RM87.00
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Cross Tee – Threaded Outlet (304) BS
RM107.25 – RM127.50
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Cross Tee – Threaded Outlet (304) API
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Cross Tee – Threaded Outlet (304) JIS
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) BS
RM82.50 – RM364.50
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) API
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) JIS
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Short Equal Tee (004)
RM32.25 – RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Tee Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION Grooved Mech. Short Equal Tee (004) API
RM32.25 – RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Equal Tee (004L) BS
RM30.00 – RM219.75
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Equal Tee (004L) API
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Equal Tee (004L) JIS
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Grooved End (011) API
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
RM57.00 – RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
RM118.50 – RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Grooved End (011) JIS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Threaded Outlet (012) API
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Threaded Outlet (012) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Threaded Outlet (012) BS
RM75.00 – RM84.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
RM97.50 – RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) API
RM17.60 – RM88.80
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) BS
RM13.60 – RM41.60
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) JIS
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Reducing Coupling (020) BS
RM44.80 – RM104.00
Style 020 Reducing Flexible Coupling is designed with a flat-pad, to create the flexibility of the pipeline in both axial and angular direction, by keeping a certain gap between the housing key and pipe groove. Reducing Flexible Coupling is an alternative and economic option to replace a combination of two couplings and a concentric reducer.
The unique G02 "C" shape gasket performs triple sealing functions with tested and proven compression set and pocket volumetric, which maintains enough seal function when the coupling is deflected.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Standard Flexible Coupling (101) API
RM22.40 – RM304.00
Style 101 flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Standard Flexible Coupling (101) BS
RM16.00 – RM63.20
Style 101 flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Standard Flexible Coupling (101) JIS
RM121.60 – RM304.00
Style 101 flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Heavy-Duty Flexible Coupling (101H) API
RM168.00 – RM788.00
Style 101H Heavy-Duty flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Heavy-Duty Flexible Coupling (101H) BS
RM46.08 – RM728.00
Style 101H Heavy-Duty flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- DUCTILE IRON FITTINGS (23)
- GALV. IRON T/E FITTINGS (125)
- STAINLESS STEEL FITTINGS (102)
- STEAM T/E FITTINGS (45)
- C.S WELDED SGP FITTINGS (36)
- C.S SEAMLESS SCH FITTINGS (15)
- MILD STEEL FITTINGS (5)
- M.S.C.L FITTINGS (15)
- MECHANICAL FITTINGS (89)
- COPPER FITTINGS (70)
- PVC & PE FITTINGS (89)
- VITRIFIED CLAY FITTINGS (6)
- FIRE PROTECTION (26)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
