-25%
VISION 150mm Grooved Mech. Concentric Reducer (008)
Price range: RM72.60 through RM337.50
VISION 100mm Grooved Mech. Concentric Reducer (008)
Price range: RM35.85 through RM45.00
VISION 125mm Grooved Mech. Concentric Reducer (008)
Original price was: RM92.00.RM69.00Current price is: RM69.00.
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 125mm(139.7) | 65mm(76.1), 80mm, 100mm |
Shipping & Delivery
Related products
VISION Grooved Mech. Straight Cross Tee (010L) BS
Price range: RM82.50 through RM364.50
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM97.50 through RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) API
Price range: RM17.60 through RM88.80
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) JIS
Original price was: RM101.00.RM80.80Current price is: RM80.80.
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Reducing Coupling (020) BS
Price range: RM44.80 through RM104.00
Style 020 Reducing Flexible Coupling is designed with a flat-pad, to create the flexibility of the pipeline in both axial and angular direction, by keeping a certain gap between the housing key and pipe groove. Reducing Flexible Coupling is an alternative and economic option to replace a combination of two couplings and a concentric reducer.
The unique G02 "C" shape gasket performs triple sealing functions with tested and proven compression set and pocket volumetric, which maintains enough seal function when the coupling is deflected.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Standard Flexible Coupling (101) BS
Price range: RM16.00 through RM63.20
Style 101 flexible coupling is designed with a flat-pad to create a flexible connection in both angular and axial directions by keeping a certain gap between the housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical PN16 BS/EN Flange Adaptor Nipple (015D2)
Price range: RM161.25 through RM297.00
All Style 015 Flange Adaptors are designed to mate with raised-face flanges but can supply with flat-face.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as EN-GJS-450-10
- Face: Flat face / Raised face
- Temperature: -30°C to 300°C
- Working Pressure: PN 16 Bar (225psi)
- Surface: Red paint/ Hot-dip galvanized