-25%
VISION 100mm Mech. Cross Tee - Threaded Outlet (304) BS
Price range: RM71.25 through RM87.00
VISION 65mm Mech. Cross Tee - Threaded Outlet (304) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
VISION 80mm Mech. Cross Tee – Threaded Outlet (304) BS
Price range: RM69.75 through RM75.00
Mechanical cross tees provide additional outlets in existing pipeline by connecting the pre-set hole at the main pipe surface.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
Shipping & Delivery
Related products
VISION Grooved Mechanical 90° Standard Elbow (002L) BS
Price range: RM18.75 through RM162.75
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Straight Cross Tee (010L) BS
Price range: RM82.50 through RM364.50
Crosses are used to join four lengths of pipe of the same diameter to form a cross shape.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Standard radius, R=1.0D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Grooved Mech. Short Equal Tee (004)
Price range: RM32.25 through RM431.25
Equal Tees are a type of pipe fitting used to connect three pieces of pipe of the same diameter to form a T-Shape.
Vision New catalogue
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Tee Sizes: |
|---|---|
| BS | 50mm(60.3), 65mm(76.1), 80mm(88.9), 100mm(114.3), 125mm(139.7), 150mm(165.1) |
| JIS | 200mm(216.3) |
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) API
Price range: RM17.60 through RM88.80
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) BS
Price range: RM13.60 through RM41.60
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Snap-Joint Coupling (S23) BS
Price range: RM56.00 through RM192.00
Style S23 Snap-Joint Coupling is designed with a handle to assemble and tight lock, create a flexible connection in both angular and axial direction by keeping a certain gap between housing key and pipe groove.
The unique "C" shape gasket performs a triple sealing, Optimized design for gasket structure to extend the service life of the coupling. It retains sealing even if the pipe moves as deflection and rotation.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Housing: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 750 PSI (5.2MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical PN16 BS/EN Flange Adaptor Nipple (015D2)
Price range: RM161.25 through RM297.00
All Style 015 Flange Adaptors are designed to mate with raised-face flanges but can supply with flat-face.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as EN-GJS-450-10
- Face: Flat face / Raised face
- Temperature: -30°C to 300°C
- Working Pressure: PN 16 Bar (225psi)
- Surface: Red paint/ Hot-dip galvanized