-25%
VISION 65mm Threaded Mech. Concentric Reducer (009)
Price range: RM37.50 through RM41.25
VISION 400mm Grooved Mech. Concentric Reducer (008)
Original price was: RM2,110.00.RM1,582.50Current price is: RM1,582.50.
VISION 50mm Threaded Mech. Concentric Reducer (009)
Original price was: RM50.00.RM37.50Current price is: RM37.50.
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
- Certificate: UL Listed / FM Approved
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor Run: Female threaded, BSPT
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.1MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS: 50mm | 20, 25mm, 32mm, 40mm |
Shipping & Delivery
Related products
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM57.00 through RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM163.00.RM122.25Current price is: RM122.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical PN16 BS/EN Flange Adaptor Nipple (015D2)
Price range: RM161.25 through RM297.00
All Style 015 Flange Adaptors are designed to mate with raised-face flanges but can supply with flat-face.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as EN-GJS-450-10
- Face: Flat face / Raised face
- Temperature: -30°C to 300°C
- Working Pressure: PN 16 Bar (225psi)
- Surface: Red paint/ Hot-dip galvanized