-25%
VISION 125mm Grooved Mech. Concentric Reducer (008)
Original price was: RM92.00.RM69.00Current price is: RM69.00.
VISION 80mm Grooved Mech. Concentric Reducer (008)
Price range: RM24.00 through RM37.12
VISION 100mm Grooved Mech. Concentric Reducer (008)
Price range: RM35.85 through RM45.00
Concentric Reducer is commonly used in reducing situations between two different OD pipes or a pipe and equipment. Concentric Reducer is made of ductile iron for middle and smaller OD, and of carbon steel fabricated for larger OD., which have passed flow friction resistance test.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
| Standards: | Reducer Sizes: |
|---|---|
| BS | 40mm, 50mm, 65mm(76.1), 80mm |
| API | 65mm(73.0) |
Shipping & Delivery
Related products
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM57.00 through RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM134.00.RM100.50Current price is: RM100.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Threaded Outlet (012) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) BS
Price range: RM13.60 through RM41.60
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Reducing Coupling (020) BS
Price range: RM44.80 through RM104.00
Style 020 Reducing Flexible Coupling is designed with a flat-pad, to create the flexibility of the pipeline in both axial and angular direction, by keeping a certain gap between the housing key and pipe groove. Reducing Flexible Coupling is an alternative and economic option to replace a combination of two couplings and a concentric reducer.
The unique G02 "C" shape gasket performs triple sealing functions with tested and proven compression set and pocket volumetric, which maintains enough seal function when the coupling is deflected.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical PN16 Split Flange Adaptor (007D2)
Price range: RM123.75 through RM283.50
Style 007D2 (PN16) provides a rigid connection with a spigot and socket design. The diameter between key sections can be adjusted by tightening nuts, until the key section grips the groove bottom around the full circumference rigidly. Split Flange Adaptor is not allowed linear movement and rotation due to an inner tooth design. Split Flange Adaptor is a rigid coupling, it is applied to connect grooved valves tightly to prevent rotating.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as EN-GJS-450-10
- Bolt & Nut: Heat‐treated plated Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: PN 16bar (225psi)
- Surface: Red paint/ Hot-dip galvanized