D.I 300LBS Black 45° Elbow
Price range: RM13.44 through RM180.00
AVK D.I Restrained Flange Adaptor
Price range: RM500.00 through RM11,650.00
AVK D.I Restrained Mechanical Coupling
Price range: RM690.00 through RM10,400.00
- 35 bar / 350 meters allowable operating pressure (AOP) to 1000mm OD
- Dedicated pipe OD, pipe ovality is critical for coupling tolerance of ±3.0mm
- Restrained
| Connection | Mechanical Joints |
| Material | Ductile Iron |
| DN | DN232 |
| Pressure | PN35 |
Shipping & Delivery
Related products
VISION Grooved Mechanical 45° Standard Elbow (003L)
Original price was: RM3,100.00.RM2,325.00Current price is: RM2,325.00.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mech. Reducing Tee – Grooved End (011) API
Original price was: RM555.00.RM416.25Current price is: RM416.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 80mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM90.00.RM67.50Current price is: RM67.50.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 125mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM163.00.RM122.25Current price is: RM122.25.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Original price was: RM1,260.00.RM945.00Current price is: RM945.00.
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical Rigid Coupling (001) JIS
Original price was: RM101.00.RM80.80Current price is: RM80.80.
Style 001 Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity. The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique "C" shape gasket performs triple sealing functions with a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
- Gasket: EPDM
- Temperature: ≤ 107°C
- Working Pressure: 300 PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION Mechanical PN16 BS/EN Flange Adaptor Nipple (015D2)
Price range: RM161.25 through RM297.00
All Style 015 Flange Adaptors are designed to mate with raised-face flanges but can supply with flat-face.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as EN-GJS-450-10
- Face: Flat face / Raised face
- Temperature: -30°C to 300°C
- Working Pressure: PN 16 Bar (225psi)
- Surface: Red paint/ Hot-dip galvanized