-25%
CONEX Copper Welding 54mm Reducing Tee
Original price was: RM94.20.RM70.65Current price is: RM70.65.
CONEX Copper Welding 35mm Reducing Tee
Original price was: RM36.80.RM27.60Current price is: RM27.60.
CONEX Copper Welding 42mm Reducing Tee
Original price was: RM60.00.RM45.00Current price is: RM45.00.
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
Shipping & Delivery
Related products
SCI STEAM 15mm Reducing Tee S/E
Original price was: RM8.00.RM5.20Current price is: RM5.20.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 32mm Reducing Tee S/E
Original price was: RM15.60.RM10.14Current price is: RM10.14.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 40mm Reducing Tee S/E
Original price was: RM24.00.RM15.60Current price is: RM15.60.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 65mm Reducing Tee S/E
Original price was: RM76.00.RM49.40Current price is: RM49.40.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
SCI STEAM 100mm Reducing Tee S/E
Original price was: RM150.00.RM97.50Current price is: RM97.50.
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
VISION 65mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM57.00 through RM60.75
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 150mm Mech. Reducing Tee – Grooved End (011) BS
Price range: RM118.50 through RM150.00
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 100mm Mech. Reducing Tee – Threaded Outlet (012) BS
Price range: RM97.50 through RM109.50
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized