-22%
HANSEN Poly Equal Coupling
RM1.75 – RM2.89Price range: RM1.75 through RM2.89
HANSEN Poly Reducing Elbow
RM2.07 – RM2.81Price range: RM2.07 through RM2.81
HANSEN Poly Reducing Tee
RM2.89 – RM3.98Price range: RM2.89 through RM3.98
The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
Shipping & Delivery
Related products
HANSEN Poly Bush
RM0.70 – RM0.78Price range: RM0.70 through RM0.78
Bush Fittings are sometimes called reducer bushings, are used for connecting two pipes of different sizes. The larger diameter of the bushing fits inside of the larger pipe.
Sansico - Hansen Fittings & Pipe
HANSEN Poly Equal Elbow
RM2.03 – RM3.28Price range: RM2.03 through RM3.28
Elbows are pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees.
Sansico - Hansen Fittings & Pipe
HANSEN Poly Male Threaded Adaptor (MTA)
RM1.29 – RM2.14Price range: RM1.29 through RM2.14
Male Threaded Adaptors are used to add a male threaded connection to a length of pipe or a fitting which will connect to a female BSP thread.
Sansico - Hansen Fittings & Pipe
VISION 80mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 200mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 250mm Mech. Reducing Tee – Grooved End (011) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
VISION 65mm Mech. Reducing Tee – Threaded Outlet (012) BS
Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
- Certificate: UL Listed / FM Approved
- Standard: ANSI / UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Type: Short radius, R=0.75D
- Temperature: -30°C to 300°C
- Working Pressure: 300PSI (2.07MPa)
- Surface: Red paint/ Hot-dip galvanized
HDPE PN12.5 Pipe (Blue Stripe)
HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high-pressure pipelines.
PALING - Pressure Piping System
| Model | PN 12.5 (Blue Stripe) |
| Color | Black |
| Diameter Sizes | 63mm ~90mm |
| Pipe Length | 50.0 & 100.0 meters |
