-35%
SCI STEAM Cross Tee S/E
RM7.80 – RM143.00Price range: RM7.80 through RM143.00
SCI STEAM 45° Elbow S/E
RM3.44 – RM78.00Price range: RM3.44 through RM78.00
SCI STEAM 90° Elbow S/E
RM1.95 – RM59.80Price range: RM1.95 through RM59.80
90° elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
Shipping & Delivery
Related products
SCI STEAM Equal Tee S/E
RM2.60 – RM72.80Price range: RM2.60 through RM72.80
The primary purpose of a Tee is to make a 90° branch from the main run of pipe. The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe.
SCI Steam Fittings
SCI STEAM Plug S/E
RM1.56 – RM29.90Price range: RM1.56 through RM29.90
Pipe Plug is used at high-pressure areas where the flow needs to be controlled. It is a perfect use for a tight hold on joints and sturdy support.
SCI Steam Fittings
SCI STEAM 45° Street Elbow S/E
RM11.44 – RM48.75Price range: RM11.44 through RM48.75
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
SCI Steam Fittings
SCI STEAM 90° Street Elbow S/E
RM2.60 – RM84.50Price range: RM2.60 through RM84.50
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
SCI Steam Fittings
SCI STEAM Reducing Elbow S/E
RM3.25 – RM20.80Price range: RM3.25 through RM20.80
A reducing elbow is a type of fitting which is used to join two pieces of pipe of different sizes. The reducing elbow is so-called because it looks like a reducing piece and elbow combined into one.
SCI Steam Fittings
SCI STEAM Reducing Nipple S/E
RM9.36 – RM39.00Price range: RM9.36 through RM39.00
Reducing Nipple is used to reduce the flow and connects to another Pipe.
SCI Steam Fittings
SCI STEAM 40mm Reducing Socket S/E
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
SCI Steam Fittings
SCI STEAM 25mm Reducing Tee S/E
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI Steam Fittings
