INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
CONEX Copper Welding 76mm Reducing Coupler
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer - larger end male copper for insertion into fitting x female copper
CONEX Copper Welding 108mm Reducing Coupler
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer - larger end male copper for insertion into fitting x female copper
CONEX Copper Welding 159mm Reducing Coupler
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer - larger end male copper for insertion into fitting x female copper
CONEX Copper Welding Equal Tee (DC611)
RM3.68 – RM1,942.50
Copper tees are used to connect (3) copper pipes and can be used to branch off the main copper pipe with equal pipe sizes.
CONEX - Delcop End Feed
CONEX Copper Welding 15mm Reducing Tee
RM6.08 – RM17.40
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 22mm Reducing Tee
RM6.75 – RM9.23
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 28mm Reducing Tee
RM14.25 – RM17.85
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 35mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 42mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 54mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 67mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 76mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 108mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 159mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
ALFRAN Mild Steel (BS10) Table ‘E’ Flange – Forged
RM16.20 – RM133.65
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system. It offers impressive mechanical performance as a connecting part.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 166.6MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 269.5MM) | |
| 300MM (ID: 321.0MM) | ||
ALFRAN 304 Stainless Steel Flange – Table ‘E’ (BS 10)
RM24.00 – RM561.00
A flange is a method of connecting pipes, valves, pumps & other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed.
| FLANGE SIZES | INNER DIAMETER |
|---|---|
| 15MM | ID: 22.4MM |
| 20MM | ID: 27.7MM |
| 25MM | ID: 34.5MM |
| 32MM | ID: 43.2MM |
| 40MM | ID: 49.5MM |
| 50MM | ID: 62.0MM |
| 65MM | ID: 74.7MM |
| 80MM | ID: 90.07MM |
| 100MM | ID: 116.1MM |
| 125MM | ID: 143.8MM |
| 150MM | ID: 170.7MM |
| 200MM | ID: 221.5MM |
| 250MM | ID: 275.0MM |
| 300MM | ID: 327.2MM |
ALFRAN 304 Stainless Steel Flange R/F – PN16 (EN 1092-1)
RM28.50 – RM1,365.00
A flange is a method of connecting pipes, valves, pumps & other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.4MM) | 20MM (ID: 27.7MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.2MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 62.0MM) | |
| 65MM (ID: 74.7MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.1MM) | 125MM (ID: 143.8MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 2121.5MM) | |
| 250MM (ID: 270.5MM) | 300MM (ID: 327.2MM) | |
| 350MM (ID: 35.2MM) | 400MM (ID: 410.5MM) | |
| 450MM (ID: 462.0MM) | 500MM (ID: 513.5MM) | |
ALFRAN 304 Stainless Steel Flange (JIS 10K)
RM23.25 – RM881.25
A flange is a method of connecting pipes, valves, pumps & other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed.
| FLANGE SIZES | INNER DIAMETER |
|---|---|
| 15MM | ID: 22.4MM |
| 20MM | ID: 27.7MM |
| 25MM | ID: 34.5MM |
| 32MM | ID: 43.2MM |
| 40MM | ID: 49.5MM |
| 50MM | ID: 62.0MM |
| 65MM | ID: 74.7MM |
| 80MM | ID: 90.7MM |
| 100MM | ID: 116.1MM |
| 125MM | ID: 143.8MM |
| 150MM | ID: 170.7MM |
| 200MM | ID: 2121.5MM |
| 250MM | ID: 270.5MM |
| 300MM | ID: 327.2MM |
| 350MM | ID: 35.2MM |
| 400MM | ID: 410.5MM |
ALFRAN 304 Stainless Steel Slip-On Flange R/F (ANSI 150LBS)
RM24.75 – RM1,155.00
Slip-on flange slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications.
R/F is Raised Face. The flange face is the surface area that hosts the gasket.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 15MM (ID: 22.2MM) | 20MM (ID: 27.8MM) | |
| 25MM (ID: 34.5MM) | 32MM (ID: 43.2MM) | |
| 40MM (ID: 49.5MM) | 50MM (ID: 61.9MM) | |
| 65MM (ID: 74.7MM) | 80MM (ID: 90.7MM) | |
| 100MM (ID: 116.1MM) | 125MM (ID: 143.8MM) | |
| 150MM (ID: 170.7MM) | 200MM (ID: 221.5MM) | |
| 250MM (ID: 275.0MM) | 300MM (ID: 327.0MM) | |
ALFRAN Mild Steel PN16 Flange R/F (EN 1092-1) – Forged
RM22.27 – RM175.50
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system.
R/F is Raised Face. The flange face is the surface area that hosts the gasket.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 167.0MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 270.0MM) | |
| 300MM (ID: 321.0MM) | ||
ALFRAN Mild Steel (JIS 10K) Flange – Forged
RM18.72 – RM213.30
Forged flange is a plate-type device, usually in circular appearance which could be attached to the ends of pipes, fittings, valves or other objects to facilitate assembly and disassembly of the piping system.
| Flange Sizes & Inner Diameter | ||
|---|---|---|
| 50MM (ID: 61.1MM) | 65MM (ID: 77.1MM) | |
| 80MM (ID: 90.0MM) | 100MM (ID: 115.4MM) | |
| 125MM (ID: 141.2MM) | 150MM (ID: 166.6MM) | |
| 200MM (ID: 218.0MM) | 250MM (ID: 269.5MM) | |
| 300MM (ID: 321.0MM) | 350MM (ID: 358.1MM) | |
ALFRAN 304 Stainless Steel 90° Elbow S/E
RM3.36 – RM143.40
90° Elbow is installed between the pipe to change the direction of the pipe by 90 Degrees.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 45° Elbow S/E
RM3.42 – RM129.60
45° Elbow is installed between the pipe to change the direction of the pipe by 45 Degrees.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Equal Tee S/E
RM5.10 – RM197.40
Equal Tees are used to connect three pieces of pipe of the same diameter to form a T-shape. It is having one inlet and two outlets, outlets are arranged at 90 degrees to the mainline connection (inlet). It can also be used to combine the flow from two inlets to one outlet.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Equal Socket
RM3.30 – RM96.30
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Equal Socket – Smooth (Full-Threaded)
RM3.30 – RM96.30
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Equal Socket – Smooth (Half-Threaded)
RM3.30 – RM13.92
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Equal Socket – Special (Smooth / Full-Threaded)
Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Nipple S/E
RM3.12 – RM78.90
The nipple is a short stub of a pipe consisting of a short straight piece of pipe, usually provided with male pipe thread at both ends, for connecting two other female threaded fittings or pipes.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Lock Nut S/E
RM1.98 – RM10.80
Lock nut can be used, for example, to create a seal against a tank wall and in other situations where there is a need to create a seal or tighter connection. Lock
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Lock Nut (Special) S/E
Lock nut can be used, for example, to create a seal against a tank wall and in other situations where there is a need to create a seal or tighter connection. Lock
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Plug S/E
RM1.80 – RM28.80
Plug is a component of plumbing component which is generally used to close pipe opening during inspections and repairs. Plug are generally contains male threads.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel End Cap S/E
RM2.28 – RM81.00
Cap covers the end of a pipe. Pipe caps are used at the dead end of the piping system. It is also used in piping headers for future connections.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Union Coupling S/E
RM9.48 – RM172.80
A Pipe Coupling or Coupler plays an important role in connecting the pipe sections while maintaining the integrity of the pipes in the process. Pipe Coupling is a very short length of pipe or tube.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Street Elbow S/E
RM3.90 – RM58.50
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Street Elbow S/E (OD:76mm)
A street elbow (sometimes called a street or service ell) is a type of fitting intended to join a piece of pipe and another fitting at an angle. A street elbow has a female fitting on one end and a male fitting on the other.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Cross Tee S/E
RM6.78 – RM291.00
Cross is also known as four-way pipe fitting. A cross has one inlet and three outlets (or vice versa). Generally, crosses are not used in process piping to transport fluid. Cross-type fittings contain 4 openings in 4 directions. These are connected when there are 4 pipes are meeting at a point.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel M/F Socket S/E
RM3.72 – RM108.00
Socket with one female threaded and the other end is male threaded, used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel M/F Socket S/E (OD:76mm)
Socket with one female threaded and the other end is male threaded, used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel M/F Socket S/E (ID:73mm OD:76mm)
Socket with one female threaded and the other end is male threaded, used to connect either a plain fitting or piece of pipe to a threaded fitting or piece of pipe of the same diameter.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Hose Nipple S/E
RM6.00 – RM12.60
There is a specialty nipple called a “hose nipple" for processes that require connection to tubing. That fitting features a male threaded connection on one end and a hose barb on the other. The hose barb may be the same size as the pipe connection or it may be reduced.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 9mm~40mm Hex Bushing S/E
RM3.24 – RM11.10
Bushings as pipe fittings combine different pipe sizes together. They decrease the larger size to the size of the smaller pipe. In comparison to a union or coupling, Bushings occupy very little space.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 50mm~100mm Hex Bushing S/E
RM18.30 – RM88.50
Bushings as pipe fittings combine different pipe sizes together. They decrease the larger size to the size of the smaller pipe. In comparison to a union or coupling, Bushings occupy very little space.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel Reducing Elbow S/E
RM6.90 – RM132.00
Reducing 90° Elbow, designed to change direction as well as reduce the size of the pipe within a piping system. The reducing elbow eliminates one pipe fitting and reduces the welding by more than one-third.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 15mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 20mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 25mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 32mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- DUCTILE IRON FITTINGS (23)
- GALV. IRON T/E FITTINGS (125)
- STAINLESS STEEL FITTINGS (102)
- STEAM T/E FITTINGS (45)
- C.S WELDED SGP FITTINGS (36)
- C.S SEAMLESS SCH FITTINGS (15)
- MILD STEEL FITTINGS (5)
- M.S.C.L FITTINGS (15)
- MECHANICAL FITTINGS (89)
- COPPER FITTINGS (70)
- PVC & PE FITTINGS (89)
- VITRIFIED CLAY FITTINGS (6)
- FIRE PROTECTION (26)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
