INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
Home » Plain End
M.S.C.L 45° Bend – Plain End BS
RM73.00 – RM215.00
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
M.S.C.L 45° Bend – Plain End (Painted) BS
RM73.00 – RM86.00
45° Bends are used to connect two pieces of pipe of the same diameter at an angle of 45 degrees with a gradual curve for a smooth flow and a high-pressure rating.
M.S.C.L 90° Bend – Plain End BS
RM83.00 – RM420.00
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
M.S.C.L 90° Bend – Plain End (Painted) BS
RM83.00 – RM255.00
90° Bends are used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow and a high-pressure rating.
Fitting Variations Clear
- 114.3MM X 50.0MM
- 114.3MM X 80.0MM
- 168.3MM X 50.0MM
- 168.3MM X 80.0MM
- 168.3MM X 114.3MM
- 219.1MM X 114.3MM
- 219.1MM X 168.3MM
- 273.0MM X 168.3MM
- 273.0MM X 219.1MM
- +7
M.S.C.L Reducer Taper – Plain End BS
RM48.00 – RM193.00
Reducing Pieces are used to connect two pipe fittings together, where one size is smaller than the other pipe.
M.S.C.L Reducer Taper – Plain End (Painted) BS
RM98.00
Reducing Pieces are used to connect two pipe fittings together, where one size is smaller than the other pipe.
M.S.C.L Equal Tee – Plain End BS
RM68.00 – RM198.00
Tee is a most common pipe fitting which use to connect 3 lengths of pipe. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the mainline. Equal Tee: The branch size is similar to the main pipe size.
M.S.C.L Reducing Tee – Plain End BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
M.S.C.L Equal Tee – Plain End (Painted) BS
RM68.00 – RM320.00
Tee is a most common pipe fitting which use to connect 3 lengths of pipe. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the mainline. Equal Tee: The branch size is similar to the main pipe size.
M.S.C.L Reducing Tee – Plain End (Painted) BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
MELEWAR 32mm~100mm G.I. ‘A’ Pipe – Plain End (BS EN 10255)
RM111.60 – RM432.00
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
MIG-MELEWAR - 2021 Product Catalog
| Standard | BS EN 10255 |
| Type | Grade 'A' |
| Pipe End | Plain End |
| Nominal Diameter | Ø32mm ~Ø100mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
SOUTHERN 32mm~100mm G.I. ‘A’ Pipe – Plain End (BS EN 10255)
RM111.60 – RM432.00
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
Southern Pipe Catalogue
| Standard | BS EN 10255 |
| Type | Grade 'A' |
| Pipe End | Plain End |
| Nominal Diameter | Ø32mm ~Ø100mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 25MM X 6M
- 32MM X 6M
- 40MM X 6M
- 50MM X 6M
- 65MM X 6M
- 80MM X 6M
- 90MM X 6M
- 100MM X 6M
- 125MM X 6M
- 150MM X 6M
- +8
MELEWAR 25mm~150mm G.I. ‘B’ Pipe – Plain End (BS EN 10255)
RM105.30 – RM882.00
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
MIG-MELEWAR - 2021 Product Catalog
| Standard | BS EN 10255 |
| Type | Grade 'B' |
| Pipe End | Plain End |
| Nominal Diameter | Ø25mm ~Ø150mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 25MM X 6M
- 32MM X 6M
- 40MM X 6M
- 50MM X 6M
- 65MM X 6M
- 80MM X 6M
- 100MM X 6M
- 125MM X 6M
- 150MM X 6M
- +7
SOUTHERN 25mm~150mm G.I ‘B’ Pipe – Plain End (BS EN 10255)
RM105.30 – RM882.00
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
Southern Pipe Catalogue
| Standard | BS EN 10255 |
| Type | Grade 'B' |
| Pipe End | Plain End |
| Nominal Diameter | Ø65mm ~Ø150mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 25MM X 6M
- 32MM X 6M
- 40MM X 6M
- 50MM X 6M
- 65MM X 6M
- 80MM X 6M
- 90MM X 6M
- 100MM X 6M
- 125MM X 6M
- 150MM X 6M
- +8
MELEWAR 25mm~150mm G.I. ‘C’ Pipe – Plain End (BS EN 10255)
RM128.70 – RM946.80
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
MIG-MELEWAR - 2021 Product Catalog
| Standard | BS EN 10255 |
| Type | Grade 'C' |
| Pipe End | Plain End |
| Nominal Diameter | Ø25mm ~Ø150mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 200MM X 5.8MM X 6M
- 250MM X 6.6MM X 6M
- 300MM X 6.9MM X 6M
- 350MM X 7.9MM X 6M
- +2
MELEWAR 200mm~350mm G.I Pipe – Plain End (JIS G3452)
RM1,535.00 – RM3,107.70
JIS G3452 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
MIG-MELEWAR - 2021 Product Catalog
| Standard | JIS G3452 |
| Type | Grade 'A' |
| Pipe End | Plain End |
| Nominal Diameter | Ø200mm ~Ø350mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
SOUTHERN G.I ‘AA’ Pipe – Plain End
RM44.13 – RM85.88
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
Southern Pipe Catalogue
| Standard | BS EN 10255 |
| Type | Grade 'AA'Â |
| Pipe End | Plain End |
| Nominal Diameter | Ø20mm ~Ø40mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 20MM X 6M
- 25MM X 6M
- 32MM X 6M
- 40MM X 6M
- 50MM X 6M
- 65MM X 6M
- 80MM X 6M
- 90MM X 6M
- 100MM X 6M
- 150MM X 6M
- +8
MELEWAR G.I ‘AA’ Pipe – Plain End
RM44.13 – RM553.75
BS EN 10255 pipe is available in a range of finishes. Each finish is available in both medium and heavy wall thicknesses to suit just about any pressure requirement.
MIG-MELEWAR - 2021 Product Catalog
| Standard | BS EN 10255 |
| Type | Grade 'AA'Â |
| Pipe End | Plain End |
| Nominal Diameter | Ø20mm ~Ø150mm |
| Pipe Length | 6 Meters |
| Surface Finishing | Galvanized |
Pipe Variations Clear
- 114.3MM X 3.6MM X 6M
- 168.3MM X 3.6MM X 6M
- 219.1MM X 4.0MM X 6M
- 273.0MM X 4.0MM X 6M
- +2
M.S.C.L Pipe – Plain End (SPAN TS 21827)
RM410.00 – RM1,130.00
Cement Lined Pipe is internally coated with a mortar-like compound that acts as a barrier between the carbon steel pipe and the process. The lining may be applied by hand, as is the case with pipe fittings, or with a machine. It is commonly used in the transmission of potable water and sewage applications.
LY STEEL - Brochure.pdf
PAU TATT - New Brochure
Pipe Variations Clear
- 114.3MM X 3.6MM X 6M
- 168.3MM X 3.6MM X 6M
- 219.1MM X 4.0MM X 6M
- 273.0MM X 4.0MM X 6M
- +2
M.S.C.L Pipe – Plain End (SAJ SPECS)
RM440.00 – RM1,190.00
Cement Lined Pipe is internally coated with a mortar-like compound that acts as a barrier between the carbon steel pipe and the process. The lining may be applied by hand, as is the case with pipe fittings, or with a machine. It is commonly used in the transmission of potable water and sewage applications.
LY STEEL - Brochure.pdf
PAU TATT - New Brochure
ULTRAGAL ‘AA’ In-Line Galvanized Pipe – Plain End
RM37.29 – RM143.22
UltraGal - The ultimate in-line-hot-dip galvanized tube. High strength, superior quality & long-lasting!
UltraGal_Brochure.pdf
| Shape | Circular |
| Nominal Diameter | Ø15mm ~Ø65mm |
| Pipe Length | 6 Meters |
| Surface Finishing | In-Line Hot-Dip |
| Pipe End | Plain End |
ULTRAGAL ‘AAA’ In-Line Galvanized Pipe – Plain End
RM55.22 – RM99.00
UltraGal - The ultimate in-line-hot-dip galvanized tube. High strength, superior quality & long-lasting!
UltraGal_Brochure
| Shape | Circular |
| Nominal Diameter | Ø25mm ~Ø50mm |
| Pipe Length | 6 Meters |
| Surface Finishing | In-Line Hot-Dip |
| Pipe End | Plain End |
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Filter by price
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
