INTEGRITY . RELIABILITY . INFINITE POSSIBILITIES
ONE-STOP SUPPLY & DISTRIBUTION
Menu
Categories
- ALFRAN - OUR HOUSE BRAND
- Pipes
- Fittings
- Valves
- SOLAR PV SYSTEM
- Accessories
- Building Materials
- KITCHEN SERIES
- BATHROOM SERIES
- OTHERS - NON BUILDING MATERIALS
Wishlist
0
Cart
0
Home » Reducing Tee
RM1.56 – RM39.60
The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
BBB - UPVC PIPES & FITTINGS
SAE - CATALOGUE
CEW SIN PLASTIC - CATALOGUE
CHIN LEAN - CATALOGUE
S.W.V Reducer Tee c/w Inspection Opening (I/O)
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
BBB - UPVC PIPES & FITTINGS
SAE - CATALOGUE
CEW SIN PLASTIC - CATALOGUE
CHIN LEAN - CATALOGUE
RM3.40 – RM12.00
Reducing Tees are pipe fitting used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
BBB - ABS Pipes & Fittings
AVK D.I All Socket Reducing Tee
RM400.00 – RM10,500.00- For pipeline construction in both above and below ground water applications
- High strength and impact resistance
- Ductile iron fitting to AS/NZS 2280
- Body of min. GJS-400-15 (GGG-40)
- Thermoset polymeric coated to AS/NZS 4158
- Lifting eye for easy handling by lifting equipment
| Connection | Socket x Flange |
| Material | Ductile Iron |
| DN | DN150 - DN750 |
| Pressure | PN35 |
RM0.00
Reducing tee is used for the connection of the straight line of the pipeline to change the direction of the pipeline. Connect three different threaded tubes.
MECH - Class 300 Ductile Iron Pipe Fittings
| Dimensions | Pressure |
|---|---|
| 15MM ~ 65MM | 500PSI |
M.S.C.L Reducing Tee – Plain End BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
M.S.C.L Reducing Tee – Plain End (Painted) BS
RM93.00
The reducing tee is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
CONEX ART.601EQ: Copper Equal Tee
RM16.35 – RM303.75
The tee fittings can connect with three pipe joints of the same nominal diameter to make the pipe can be turned 90 or 180 degrees.
CONEX - Compression
CONEX ART.601R: Copper Reducing Tee
RM24.00 – RM43.65
The reducing tee can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.
CONEX - Compression
CONEX Copper Welding 28mm Reducing Coupler
Reducing Sockets are used to reduce the size of a single end of pressure pipe, allowing you to connect it to a smaller diameter on an opposing pipe.
- Reducer - larger end male copper for insertion into fitting x female copper
CONEX Copper Welding 15mm Reducing Tee
RM6.08 – RM17.40
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 22mm Reducing Tee
RM6.75 – RM9.23
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 28mm Reducing Tee
RM14.25 – RM17.85
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 35mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 42mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 54mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 67mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 76mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 108mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
CONEX Copper Welding 159mm Reducing Tee
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run. This type of pipe fitting can also consider size reduction from one of the run ports to the other.
- DC611RB: Reduced Branch
- DC611RE: Reduced One End
- DC611REB: Reduced One End & Branch
- DC611REE: Reduced Both Ends
ALFRAN 304 Stainless Steel 15mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 20mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 25mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 32mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 40mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 50mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 65mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 80mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
ALFRAN 304 Stainless Steel 100mm Reducing Tee S/E
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel Fittings
SCI 32mm~65mm G.I Reducing Cross Tee
RM16.00 – RM57.89
Reducing Cross Pipe Fitting are the fittings that interface or connect different pipes together and permits to convert the way and department. There is moreover encourages the development of fluid in a secure way.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
Reducing Tees connect one vertical pipe to two horizontal ones. They are used extensively in pipelines to transport two-phase fluid mixtures but are also found in HVAC systems, gas lines and many more piping networks.
SCI - Quality Malleable Iron Pipe Fittings & Solutions
TSP 20mm~65mm G.I Reducing Tee
RM3.42 – RM34.84
Reducing Tees are pipe fitting used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.
S2S Stainless Steel Reducing Tee S/E
RM7.50 – RM64.80
The diameter of the branch size is smaller than the diameter of the Run (Header) Pipe. Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller.
304 Stainless Steel (SCH 10) BW 65mm Reducing Tee
RM79.20 – RM96.30
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 80mm Reducing Tee
RM94.50 – RM99.00
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 100mm Reducing Tee
RM139.50 – RM144.90
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 125mm Reducing Tee
RM234.00 – RM241.20
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 150mm Reducing Tee
RM297.00 – RM335.70
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 200mm Reducing Tee
RM571.50 – RM603.00
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
304 Stainless Steel (SCH 10) BW 250mm Reducing Tee
The most common pipe fitting is a stainless steel pipe tee or specifically a straight pipe tee. Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. A reducing tee can connect various sizes of pipes together in one pipe system.
DELIVERY
The total amount paid DOES NOT include delivery fees. Once your order is placed, our dedicated team will contact you as soon as possible regarding any possible fees incurred & stock availability for your order.
For more information:
Purchasing Policy
SUPPORT SYSTEM
For any queries, please contact our dedicated support team. Available from Monday to Friday (9AM - 5PM). **EXCEPT FOR PUBLIC HOLIDAYS
Product Categories
- ALFRAN - OUR HOUSE BRAND (148)
- Pipes (100)
- Fittings (646)
- Valves (68)
- SOLAR PV SYSTEM (2)
- Accessories (46)
- Building Materials (91)
- KITCHEN SERIES (10)
- BATHROOM SERIES (1)
- OTHERS - NON BUILDING MATERIALS (1)
Our Brands list
- All brands
- ADX(1)
- AIWC(1)
- ALFRAN(148)
- ALLIANCE STEEL(1)
- AMSTEEL(8)
- AVK(11)
- BBB(59)
- BM GENERAL(29)
- BRICK DOTCOM(1)
- BUTELINE(6)
- CEW SIN PLASTIC(40)
- CHIN LEAN PLASTIC(41)
- CHINA(1)
- CITY(42)
- CONEX(54)
- DOE(26)
- FOTILE(6)
- FUJIOH(5)
- GEORG FISCHER(13)
- GKM(3)
- HANSEN(13)
- HOTO(16)
- HUME CEMENT(5)
- HYUNDAI STEEL(2)
- JOTUN(4)
- JPC INTAN(3)
- KAMEN STEEL(3)
- KANZEN TETSU(3)
- KELEN PP-RCT(8)
- KEMBLA(2)
- KINKO(61)
- LAFARGE(4)
- LY STEEL PIPE(19)
- ME GENERAL(47)
- MECH(12)
- METEX STEEL(3)
- MIG-MELEWAR(44)
- MIGHTY(2)
- MOLECOR(1)
- NIPPON STEEL(3)
- PALING(1)
- PANTECH(2)
- PAU TATT(4)
- PD BRICK(1)
- PENN(3)
- REALFLEX(6)
- RELIABLE(20)
- S2S(18)
- SCI(76)
- SENTOSA BRICKWORKS(1)
- SIAM YAMATO STEEL(3)
- SOUTH ASIA EXACT(41)
- SOUTHERN STEEL(51)
- SUNWAY VCP(5)
- TAN TIMUR(2)
- TSP(17)
- ULTRAGAL(3)
- UNITED JAYA(10)
- VISION(89)
- WEBER (E-MIX)(4)
- YEW LEAN(4)
- YODOSHI(15)
